Configuring a shared container partition for the image-based upgrade
Esc
Start typing to search...
On this page

Configuring a shared container partition for the image-based upgrade

Your single-node OpenShift clusters need to have a shared /var/lib/containers partition for the image-based upgrade. You can do this at install time.

Configuring a shared container partition between ostree stateroots

Apply a MachineConfig to both the seed and the target clusters during installation time to create a separate partition and share the /var/lib/containers partition between the two ostree stateroots that will be used during the upgrade process.

Important

You must complete this procedure at installation time.

Procedure

  • Apply a MachineConfig to create a separate partition:
    yaml
    apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
metadata:
  labels:
    machineconfiguration.openshift.io/role: master
  name: 98-var-lib-containers-partitioned
spec:
  config:
    ignition:
      version: 3.2.0
    storage:
      disks:
        - device: /dev/disk/by-path/<root_disk>
          partitions:
            - label: var-lib-containers
              startMiB: <start_of_partition>
              sizeMiB: <partition_size>
      filesystems:
        - device: /dev/disk/by-partlabel/var-lib-containers
          format: xfs
          mountOptions:
            - defaults
            - prjquota
          path: /var/lib/containers
          wipeFilesystem: true
    systemd:
      units:
        - contents: |-
            # Generated by Butane
            [Unit]
            Before=local-fs.target
            Requires=systemd-fsck@dev-disk-by\x2dpartlabel-var\x2dlib\x2dcontainers.service
            After=systemd-fsck@dev-disk-by\x2dpartlabel-var\x2dlib\x2dcontainers.service

            [Mount]
            Where=/var/lib/containers
            What=/dev/disk/by-partlabel/var-lib-containers
            Type=xfs
            Options=defaults,prjquota

            [Install]
            RequiredBy=local-fs.target
          enabled: true
          name: var-lib-containers.mount

    where:

    <root_disk>

    Specifies the root disk, for example pci-0000:01:00.0-scsi-0:2:0:0.

    <start_of_partition>

    Specifies the start of the partition in MiB. If the value is too small, the installation will fail.

    <partition_size>

    Specifies a minimum size for the partition of 500 GB (512000 MiB) to ensure adequate disk space for precached images. If the value is too small, the deployments after installation will fail.

Configuring a shared container directory between ostree stateroots when using GitOps ZTP

When you are using the GitOps Zero Touch Provisioning (ZTP) workflow, you do the following procedure to create a separate disk partition on both the seed and target cluster and to share the /var/lib/containers partition.

Important

You must complete this procedure at installation time.

Prerequisites

  • You have installed Butane. For more information, see "Installing Butane".

Procedure

  1. Create the storage.bu file:
    yaml
    variant: fcos
version: 1.3.0
storage:
  disks:
  - device: /dev/disk/by-path/pci-<root_disk>
    wipe_table: false
    partitions:
    - label: var-lib-containers
      start_mib: <start_of_partition>
      size_mib: <partition_size>
  filesystems:
    - path: /var/lib/containers
      device: /dev/disk/by-partlabel/var-lib-containers
      format: xfs
      wipe_filesystem: true
      with_mount_unit: true
      mount_options:
        - defaults
        - prjquota

    where:

    <root_disk>

    Specifies the root disk.

    <start_of_partition>

    Specifies the start of the partition in MiB. If the value is too small, the installation will fail.

    <partition_size>

    Specifies a minimum size for the partition of 500 GB to ensure adequate disk space for precached images. If the value is too small, the deployments after installation will fail.

  2. Convert the storage.bu to an Ignition file by running the following command:
    terminal
    $ butane storage.bu

    Example output:

    terminal
    {"ignition":{"version":"3.2.0"},"storage":{"disks":[{"device":"/dev/disk/by-path/pci-0000:00:17.0-ata-1.0","partitions":[{"label":"var-lib-containers","sizeMiB":0,"startMiB":250000}],"wipeTable":false}],"filesystems":[{"device":"/dev/disk/by-partlabel/var-lib-containers","format":"xfs","mountOptions":["defaults","prjquota"],"path":"/var/lib/containers","wipeFilesystem":true}]},"systemd":{"units":[{"contents":"# Generated by Butane\n[Unit]\nRequires=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\nAfter=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\n\n[Mount]\nWhere=/var/lib/containers\nWhat=/dev/disk/by-partlabel/var-lib-containers\nType=xfs\nOptions=defaults,prjquota\n\n[Install]\nRequiredBy=local-fs.target","enabled":true,"name":"var-lib-containers.mount"}]}}
  3. Copy the output into the spec.nodes[].ignitionConfigOverride field in the ClusterInstance CR:
    yaml
    apiVersion: siteconfig.open-cluster-management.io/v1alpha1
kind: ClusterInstance
metadata:
  name: "example-sno"
  namespace: "example-sno"
spec:
  # ...
  nodes:
    - hostName: "node1.example.com"
      role: "master"
          ignitionConfigOverride: '{"ignition":{"version":"3.2.0"},"storage":{"disks":[{"device":"/dev/disk/by-path/pci-0000:00:17.0-ata-1.0","partitions":[{"label":"var-lib-containers","sizeMiB":0,"startMiB":250000}],"wipeTable":false}],"filesystems":[{"device":"/dev/disk/by-partlabel/var-lib-containers","format":"xfs","mountOptions":["defaults","prjquota"],"path":"/var/lib/containers","wipeFilesystem":true}]},"systemd":{"units":[{"contents":"# Generated by Butane\n[Unit]\nRequires=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\nAfter=systemd-fsck@dev-disk-by\\x2dpartlabel-var\\x2dlib\\x2dcontainers.service\n\n[Mount]\nWhere=/var/lib/containers\nWhat=/dev/disk/by-partlabel/var-lib-containers\nType=xfs\nOptions=defaults,prjquota\n\n[Install]\nRequiredBy=local-fs.target","enabled":true,"name":"var-lib-containers.mount"}]}}'

Verification

  1. During or after installation, verify on the hub cluster that the BareMetalHost object shows the annotation by running the following command:
    terminal
    $ oc get bmh -n my-sno-ns my-sno -ojson | jq '.metadata.annotations["bmac.agent-install.openshift.io/ignition-config-overrides"]'

    Example output:

    terminal
    "{\"ignition\":{\"version\":\"3.2.0\"},\"storage\":{\"disks\":[{\"device\":\"/dev/disk/by-path/pci-0000:00:17.0-ata-1.0\",\"partitions\":[{\"label\":\"var-lib-containers\",\"sizeMiB\":0,\"startMiB\":250000}],\"wipeTable\":false}],\"filesystems\":[{\"device\":\"/dev/disk/by-partlabel/var-lib-containers\",\"format\":\"xfs\",\"mountOptions\":[\"defaults\",\"prjquota\"],\"path\":\"/var/lib/containers\",\"wipeFilesystem\":true}]},\"systemd\":{\"units\":[{\"contents\":\"# Generated by Butane\\n[Unit]\\nRequires=systemd-fsck@dev-disk-by\\\\x2dpartlabel-var\\\\x2dlib\\\\x2dcontainers.service\\nAfter=systemd-fsck@dev-disk-by\\\\x2dpartlabel-var\\\\x2dlib\\\\x2dcontainers.service\\n\\n[Mount]\\nWhere=/var/lib/containers\\nWhat=/dev/disk/by-partlabel/var-lib-containers\\nType=xfs\\nOptions=defaults,prjquota\\n\\n[Install]\\nRequiredBy=local-fs.target\",\"enabled\":true,\"name\":\"var-lib-containers.mount\"}]}}"
  2. After installation, check the single-node OpenShift disk status by running the following commands:
    terminal
    # lsblk

    Example output:

    terminal
    NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
sda      8:0    0 446.6G  0 disk
├─sda1   8:1    0     1M  0 part
├─sda2   8:2    0   127M  0 part
├─sda3   8:3    0   384M  0 part /boot
├─sda4   8:4    0 243.6G  0 part /var
│                                /sysroot/ostree/deploy/rhcos/var
│                                /usr
│                                /etc
│                                /
│                                /sysroot
└─sda5   8:5    0 202.5G  0 part /var/lib/containers
    terminal
    # df -h

    Example output:

    terminal
    Filesystem      Size  Used Avail Use% Mounted on
devtmpfs        4.0M     0  4.0M   0% /dev
tmpfs           126G   84K  126G   1% /dev/shm
tmpfs            51G   93M   51G   1% /run
/dev/sda4       244G  5.2G  239G   3% /sysroot
tmpfs           126G  4.0K  126G   1% /tmp
/dev/sda5       203G  119G   85G  59% /var/lib/containers
/dev/sda3       350M  110M  218M  34% /boot
tmpfs            26G     0   26G   0% /run/user/1000

Additional resources