--- title: Configuring an egress firewall for a project --- # Configuring an egress firewall for a project {#configuring-egress-firewall-ovn} As a cluster administrator, you can create an egress firewall for a project that restricts egress traffic leaving your OpenShift Container Platform cluster. ## How an egress firewall works in a project {#nw-egress-firewall-about_configuring-egress-firewall-ovn} As a cluster administrator, you can use an *egress firewall* to limit the external hosts that some or all pods can access from within the cluster. An egress firewall supports the following scenarios: - A pod can only connect to internal hosts and cannot initiate connections to the public internet. - A pod can only connect to the public internet and cannot initiate connections to internal hosts that are outside the OpenShift Container Platform cluster. - A pod cannot reach specified internal subnets or hosts outside the OpenShift Container Platform cluster. - A pod can only connect to specific external hosts. For example, you can allow one project access to a specified IP range but deny the same access to a different project. Or, you can restrict application developers from updating from Python pip mirrors, and force updates to come only from approved sources. You configure an egress firewall policy by creating an `EgressFirewall` custom resource (CR). The egress firewall matches network traffic that meets any of the following criteria: - An IP address range in CIDR format - A DNS name that resolves to an IP address - A port number - A protocol that is one of the following protocols: TCP, UDP, and SCTP ### Limitations of an egress firewall {#limitations-of-an-egress-firewall-ovn-k_configuring-egress-firewall-ovn} An egress firewall has the following limitations: - No project can have more than one `EgressFirewall` CR. - Egress firewall rules do not apply to traffic that goes through routers. Any user with permission to create a `Route` CR object can bypass egress firewall policy rules by creating a route that points to a forbidden destination. - Egress firewall does not apply to the host network namespace. Pods with host networking enabled are unaffected by egress firewall rules. - If your egress firewall includes a deny rule for `0.0.0.0/0`, access to your OpenShift Container Platform API servers is blocked. You must either add allow rules for each IP address or use the `nodeSelector` type allow rule in your egress policy rules to connect to API servers. The following example illustrates the order of the egress firewall rules necessary to ensure API server access: ```yaml apiVersion: k8s.ovn.org/v1 kind: EgressFirewall metadata: name: default namespace: spec: egress: - to: cidrSelector: type: Allow # ... - to: cidrSelector: 0.0.0.0/0 type: Deny ``` where: : Specifies the namespace for the egress firewall. : Specifies the IP address range that includes your OpenShift Container Platform API servers. : Specifies a value of `0.0.0.0/0` to set a global deny rule that prevents access to the OpenShift Container Platform API servers. To find the IP address for your API servers, run `oc get ep kubernetes -n default`. - A maximum of one `EgressFirewall` object with a maximum of 8,000 rules can be defined per project. - If you are using the OVN-Kubernetes network plugin with shared gateway mode in Red Hat OpenShift Networking, return ingress replies are affected by egress firewall rules. If the egress firewall rules drop the ingress reply destination IP, the traffic is dropped. - In general, using Domain Name Server (DNS) names in your egress firewall policy does not affect local DNS resolution through CoreDNS. However, if your egress firewall policy uses domain names and an external DNS server handles DNS resolution for an affected pod, you must include egress firewall rules that permit access to the IP addresses of your DNS server. Violating any of these restrictions results in a broken egress firewall for the project. Consequently, all external network traffic is dropped, which can cause security risks for your organization. An `EgressFirewall` resource is created in the `kube-node-lease`, `kube-public`, `kube-system`, `openshift` and `openshift-` projects. ### Matching order for egress firewall policy rules {#policy-rule-order-ovn-k_configuring-egress-firewall-ovn} OVN-Kubernetes evaluates egress firewall policy rules in the order they are defined in, from first to last. The first rule that matches an egress connection from a pod applies. Any subsequent rules are ignored for that connection. ### How Domain Name Server (DNS) resolution works {#domain-name-server-resolution-ovn-k_configuring-egress-firewall-ovn} If you use DNS names in any of your egress firewall policy rules, proper resolution of the domain names is subject to the following restrictions: - Domain name updates are polled based on a time-to-live (TTL) duration. By default, the duration is 30 minutes. When the egress firewall controller queries the local name servers for a domain name, if the response includes a TTL and the TTL is less than 30 minutes, the controller sets the duration for that DNS name to the returned value. Each DNS name is queried after the TTL for the DNS record expires. - The pod must resolve the domain from the same local name servers when necessary. Otherwise the IP addresses for the domain known by the egress firewall controller and the pod can be different. If the IP addresses for a hostname differ, the egress firewall might not be enforced consistently. - Because the egress firewall controller and pods asynchronously poll the same local name server, the pod might obtain the updated IP address before the egress controller does, which causes a race condition. Due to this current limitation, domain name usage in `EgressFirewall` objects is only recommended for domains with infrequent IP address changes. #### Improved DNS resolution and resolving wildcard domain names {#nw-coredns-egress-firewall_configuring-egress-firewall-ovn} To support frequently changing IP addresses or wildcard domain names, the OVN-Kubernetes cluster manager creates a `DNSNameResolver` custom resource object for each unique DNS name used in your egress firewall policy rules. This custom resource stores the following information: > [!IMPORTANT] > Improved DNS resolution for egress firewall rules is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process. > > For more information about the support scope of Red Hat Technology Preview features, see [Technology Preview Features Support Scope](https://access.redhat.com/support/offerings/techpreview/). ```yaml {title="Example DNSNameResolver CR definition"} apiVersion: networking.openshift.io/v1alpha1 kind: DNSNameResolver spec: name: www.example.com. status: resolvedNames: - dnsName: www.example.com. resolvedAddress: - ip: "1.2.3.4" ttlSeconds: 60 lastLookupTime: "2023-08-08T15:07:04Z" ``` where: : Specifies the DNS name. This can be either a standard DNS name or a wildcard DNS name. For a wildcard DNS name, the DNS name resolution information contains all of the DNS names that match the wildcard DNS name. : Specifies the resolved DNS name matching the `spec.name` field. If the `spec.name` field contains a wildcard DNS name, then multiple `dnsName` entries are created that contain the standard DNS names that match the wildcard DNS name when resolved. If the wildcard DNS name can also be successfully resolved, then this field also stores the wildcard DNS name. : Specifies the current IP addresses associated with the DNS name. : Specifies the last time-to-live (TTL) duration. : Specifies the last lookup time. If during DNS resolution the DNS name in the query matches any name defined in a `DNSNameResolver` CR, then the previous information is updated accordingly in the CR `status` field. For unsuccessful DNS wildcard name lookups, the request is retried after a default TTL of 30 minutes. The OVN-Kubernetes cluster manager watches for updates to an `EgressFirewall` custom resource object, and creates, modifies, or deletes `DNSNameResolver` CRs associated with those egress firewall policies when that update occurs. > [!WARNING] > Do not modify `DNSNameResolver` custom resources directly. This can lead to unwanted behavior of your egress firewall. ## EgressFirewall custom resource (CR) {#nw-egress-firewall-object_configuring-egress-firewall-ovn} You can define one or more rules for an egress firewall. A rule is either an `Allow` rule or a `Deny` rule, with a specification for the traffic that the rule applies to. The following YAML describes an `EgressFirewall` CR: ```yaml {title="EgressFirewall object"} apiVersion: k8s.ovn.org/v1 kind: EgressFirewall metadata: name: spec: egress: ... ``` where: : The name for the object must be `default`. : Specifies a collection of one or more egress network policy rules as described in the following section. ### EgressFirewall rules {#egress-firewall-rules_configuring-egress-firewall-ovn} The following YAML describes the rules for an `EgressFirewall` resource. The user can select either an IP address range in CIDR format, a domain name, or use the `nodeSelector` field to allow or deny egress traffic. The `egress` stanza expects an array of one or more objects. ```yaml {title="Egress policy rule stanza"} egress: - type: to: cidrSelector: dnsName: nodeSelector: : ports: ... ``` where: : Specifies the type of rule. The value must be either `Allow` or `Deny`. : Specifies a stanza describing an egress traffic match rule that specifies the `cidrSelector` field or the `dnsName` field. You cannot use both fields in the same rule. : Specifies an IP address range in CIDR format. : Specifies a DNS domain name. : Specifies labels which are key and value pairs that the user defines. Labels are attached to objects, such as pods. The `nodeSelector` allows for one or more node labels to be selected and attached to pods. : Specifies an optional field that describes a collection of network ports and protocols for the rule. ```yaml {title="Ports stanza"} ports: - port: protocol: ``` where: : Specifies a network port, such as `80` or `443`. If you specify a value for this field, you must also specify a value for the `protocol` field. : Specifies a network protocol. The value must be either `TCP`, `UDP`, or `SCTP`. ### Example EgressFirewall CR {#egress-firewall-example_configuring-egress-firewall-ovn} The following example defines several egress firewall policy rules: ```yaml apiVersion: k8s.ovn.org/v1 kind: EgressFirewall metadata: name: default spec: egress: - type: Allow to: cidrSelector: 1.2.3.0/24 - type: Deny to: cidrSelector: 0.0.0.0/0 ``` where: : Specifies a collection of egress firewall policy rule objects. The following example defines a policy rule that denies traffic to the host at the `172.16.1.1/32` IP address, if the traffic is using either the TCP protocol and destination port `80` or any protocol and destination port `443`. ```yaml apiVersion: k8s.ovn.org/v1 kind: EgressFirewall metadata: name: default spec: egress: - type: Deny to: cidrSelector: 172.16.1.1/32 ports: - port: 80 protocol: TCP - port: 443 ``` ### Example EgressFirewall CR using nodeSelector {#configuring-NodeSelector-egfw-example_configuring-egress-firewall-ovn} As a cluster administrator, you can allow or deny egress traffic to nodes in your cluster by specifying a label using `nodeSelector` field. Labels can be applied to one or more nodes. Labels can be helpful because instead of adding manual rules per node IP address, you can use node selectors to create a label that allows pods behind an egress firewall to access host network pods. The following is an example with the `region=east` label: ```yaml apiVersion: k8s.ovn.org/v1 kind: EgressFirewall metadata: name: default spec: egress: - to: nodeSelector: matchLabels: region: east type: Allow ``` ## Creating an EgressFirewall custom resource (CR) {#nw-egress-firewall-policy-create_configuring-egress-firewall-ovn} As a cluster administrator, you can create an egress firewall policy object for a project. > [!IMPORTANT] > If the project already has an `EgressFirewall` resource, you must edit the existing policy to make changes to egress firewall rules. **Prerequisites** - A cluster that uses the OVN-Kubernetes network plugin. - Install the OpenShift CLI (`oc`). - You must log in to the cluster as a cluster administrator. **Procedure** 1. Create a policy rule: 1. Create a `.yaml` file where `` describes the egress policy rules. 2. Define the `EgressFirewall` object in the file. 2. Create the policy object by entering the following command. Replace `` with the name of the policy and `` with the project that the rule applies to. ```terminal $ oc create -f .yaml -n ``` Successful output lists the `egressfirewall.k8s.ovn.org/v1` name and the `created` status. 3. Optional: Save the `.yaml` file so that you can make changes later.