Volume populators

Volume populators enable the automatic pre-loading of data into a volume during dynamic provisioning, instead of provisioning an empty volume.

Volume populators overview

With volume populators, using the dataSourceRef field, you can prepopulate volumes from a Custom Resource Definition (CRD) instead of only persistent volume claims (PVCs) and snapshots.

In OpenShift Container Platform versions 4.12 through 4.19, the dataSource field in a PVC spec provides volume populator capability. However, it is limited to using only PVCs and snapshots as the data source for populating volumes.

Starting with OpenShift Container Platform version 4.20, the dataSourceRef field is used instead. With the dataSourceRef field, you can use any appropriate custom resource (CR) as the data source to prepopulate a new volume.

Note

Volume populator functionality using the dataSource field is likely to be deprecated in future versions. If you have created any volume populators using this field, consider re-creating your volume populators to use the dataSourceRef field to avoid future issues.

Volume population is enabled by default and OpenShift Container Platform includes the installed volume-data-source-validator controller. However, OpenShift Container Platform does not ship with any volume populators.

Volume populators creation

To implement custom volume prepopulation behavior, create a volume populator by defining a custom resource definition (CRD) and then using it to create prepopulated volumes.

Creating CRDs for volume populators

To enable custom volume prepopulation, create a Custom Resource Definition (CRD) that defines a data source that users can instantiate to populate persistent volume claims (PVCs).

The following procedure explains how to create an example "hello, world" CRD for a volume populator.

Users can then create instances of this CRD to populate PVCs.

Prerequisites

Access to the OpenShift Container Platform web console.
Access to the cluster with cluster-admin privileges.

Procedure

Create a namespace for the logical grouping and operation of the populator, and related resources, using the following example YAML file:
Example namespace YAML file
```
apiVersion: v1
kind: Namespace
metadata:
  name: hello
```

Create a CRD for your data source using the following example YAML file:

Example CRD YAML file

apiVersion: apiextensions.k8s.io/v1
kind: CustomResourceDefinition
metadata:
  name: hellos.hello.example.com
spec:
  group: hello.example.com
  names:
    kind: Hello
    listKind: HelloList
    plural: hellos
    singular: hello
  scope: Namespaced
  versions:
  - name: v1alpha1
    schema:
      openAPIV3Schema:
        description: Hello is a specification for a Hello resource
        properties:
          apiVersion:
            description: 'APIVersion defines the versioned schema of this representation
              of an object. Servers should convert recognized schemas to the latest
              internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
            type: string
          kind:
            description: 'Kind is a string value representing the REST resource this
              object represents. Servers may infer this from the endpoint the client
              submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
            type: string
          spec:
            description: HelloSpec is the spec for a Hello resource
            properties:
              fileContents:
                type: string
              fileName:
                type: string
            required:
            - fileContents
            - fileName
            type: object
        required:
        - spec
        type: object
    served: true
    storage: true

Deploy the controller by creating a ServiceAccount, ClusterRole, ClusterRoleBindering, and Deployment to run the logic that implements the population:

Create a service account for the populator using the following example YAML file:
Example service account YAML file
```
apiVersion: v1
kind: ServiceAccount
metadata:
  name: hello-account
  namespace: hello
```
Where metadata.namespace references the namespace that you created earlier.

Create a cluster role for the populator using the following example YAML file:

Example cluster role YAML file

kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: hello-role
rules:
  - apiGroups: [hello.example.com]
    resources: [hellos]
    verbs: [get, list, watch]

Create a cluster role binding using the following example YAML file:
Example cluster role binding YAML file
```
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: hello-binding
subjects:
  - kind: ServiceAccount
    name: hello-account
    namespace: hello
roleRef:
  kind: ClusterRole
  name: hello-role
  apiGroup: rbac.authorization.k8s.io
```
- metadata.name: Specifies the role binding name.
- subjects.name: References the name of the service account that you created earlier.
- subjects.namespace: References the name of the namespace for the service account that you created earlier.
- roleRef.name: References the cluster role you created earlier.

Create a Deployment for the populator using the following example YAML file:

Example deployment YAML file

kind: Deployment
apiVersion: apps/v1
metadata:
  name: hello-populator
  namespace: hello
spec:
  selector:
    matchLabels:
      app: hello
  template:
    metadata:
      labels:
        app: hello
    spec:
      serviceAccount: hello-account
      containers:
        - name: hello
          image: registry.k8s.io/sig-storage/hello-populator:v1.0.1
          imagePullPolicy: IfNotPresent
          args:
            - --mode=controller
            - --image-name=registry.k8s.io/sig-storage/hello-populator:v1.0.1
            - --http-endpoint=:8080
          ports:
            - containerPort: 8080
              name: http-endpoint
              protocol: TCP

metadata.namespace: References the namespace that you created earlier.
spec.template.spec.serviceAccount: References the service account that you created earlier.

Create a volume populator to register the kind:Hello resource as a valid data source for the volume using the following example YAML file:
Example volume populator YAML file
```
kind: VolumePopulator
apiVersion: populator.storage.k8s.io/v1beta1
metadata:
  name: hello-populator
sourceKind:
  group: hello.example.com
  kind: Hello
```
The metadata.name field specifies the Volume populator name.
PVCs that use an unregistered populator generate an event: "The datasource for this PVC does not match any registered VolumePopulator", indicating that the PVC might not be provisioned because you are using an unknown (unregistered) populator.

Next steps

You can now create CR instances of this CRD to populate PVCs
For more information, see "Creating prepopulated volumes using volume populators".

Creating prepopulated volumes using volume populators

To create volumes that are automatically filled with data when provisioned, define a Custom Resource Definition (CRD) as a data source and reference it when creating the persistent volume claim (PVC).

The following procedure explains how to create a prepopulated PVC using the example hellos.hello.example.com CRD created previously.

In this example, rather than using an actual data source, you are creating a file called "example.txt" that contains the string "Hello, world!" in the root directory of the volume. For a real-world implementation, you need to create your own volume populator.

Prerequisites

You are logged in to a running OpenShift Container Platform cluster.
There is an existing CRD for volume populators.
OpenShift Container Platform does not ship with any volume populators. You must create your own volume populator.

Procedure

Create a Custom Resource (CR) instance of the Hello CRD with the text "Hello, World!" passed in as fileContents parameter by running the following command:

terminal

$ oc apply -f  - <<EOF
apiVersion: hello.example.com/v1alpha1
kind: Hello
metadata:
  name: example-hello
spec:
  fileName: example.txt
  fileContents: Hello, world!
EOF

Create a PVC that references the Hello CR similar to the following example file:

Example PVC YAML file

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: example-pvc
spec:
  accessModes:
  - ReadWriteOnce
  resources:
    requests:
      storage: 10Mi
  dataSourceRef:
    apiGroup: hello.example.com
    kind: Hello
    name: example-hello
  volumeMode: Filesystem

spec.dataSourceRef: Specifies the data source for the PVC.
spec.dataSourceRef.name: Specifies the name of the CR that you are using as the data source. In this example, it is 'example-hello'.

Verification

After a few minutes, ensure that the PVC is created and in the Bound status by running the following command:

terminal

$ oc get pvc example-pvc -n hello

In this example, the name of the PVC is example-pvc.

Example output

NAME          STATUS    VOLUME        CAPACITY   ACCESS MODES   STORAGECLASS   VOLUMEATTRIBUTESCLASS   AGE
example-pvc   Bound     my-pv         10Mi       ReadWriteOnce  gp3-csi        <unset>                 14s

Create a job that reads from the PVC to verify that the data source information was applied using the following example file:

Example job YAML file

apiVersion: batch/v1
kind: Job
metadata:
  name: example-job
spec:
  template:
    spec:
      containers:
        - name: example-container
          image: busybox:latest
          command:
            - cat
            - /mnt/example.txt
          volumeMounts:
            - name: vol
              mountPath: /mnt
      restartPolicy: Never
      volumes:
        - name: vol
          persistentVolumeClaim:
            claimName: example-pvc

spec.template.spec.containers.command: Specifies the location and name of the file with the "Hello, world!" text. In this example, the location is "/mnt/example.txt".
spec.template.spec.volumes.persistentVolumeClaim: Specifies the name of the PVC you created in Step 2. In this example, it is example-pvc.

Start the job by running the following command:

terminal

$ oc run example-job --image=busybox --command -- sleep 30 --restart=OnFailure

Example output

pod/example-job created

Wait for the job, and all of its dependencies, to finish by running the following command:
terminal
```
$ oc wait --for=condition=Complete pod/example-job
```
Verify the contents collected by the job by running the following command:
terminal
```
$ oc logs job/example-job
```
Example expected output
```
Hello, world!
```

Uninstalling volume populators

To remove custom volume prepopulation functionality, delete all volume populator resources in reverse order of creation.

Prerequisites

Access to the OpenShift Container Platform web console.
Access to the cluster with cluster-admin privileges.

Procedure

To uninstall volume populators, delete in reverse order all objects installed in the following procedures:
1. "Creating prepopulated volumes using volume populators".
2. "Creating CRDs for volume populators".
  Be sure to remove the VolumePopulator instance.

Volume populators¶

Volume populators overview¶

Volume populators creation¶

Creating CRDs for volume populators¶

Creating prepopulated volumes using volume populators¶

Uninstalling volume populators¶

Volume populators

Volume populators overview

Volume populators creation

Creating CRDs for volume populators

Creating prepopulated volumes using volume populators

Uninstalling volume populators