Verifying Gateway infrastructure status

To ensure your gateway infrastructure is properly configured and functioning, review the status conditions of your GatewayClass and Gateway custom resources (CRs). Checking these conditions confirms that the controller has successfully programmed your underlying data plane without routing conflicts.

GatewayClass status conditions reference

To verify that your GatewayClass custom resource (CR) is valid and ready to provision gateways, review its status conditions. A healthy GatewayClass CR reports a status of True for core conditions like Accepted and SupportedVersion.

GatewayClass** CR status conditions**

Condition	Status	Description and common reasons
`Accepted`	`True`	The `GatewayClass` CR is valid and the controller has claimed it.
`Accepted`	`False`	The configuration has errors or was rejected. Common reasons include `InvalidParameters` (referenced parameters are invalid or not found), `Pending` (the controller has not processed the resource yet), or `Unknown` (an unsupported `controllerName` was provided).
`Accepted`	`Unknown`	The `GatewayClass` CR is waiting for the controller to process it.
`SupportedVersion`	`True`	The installed Gateway API version is compatible with the controller.
`SupportedVersion`	`False`	There is a version mismatch. A common reason is `UnsupportedVersion`, which indicates that the custom resource definition (CRD) version does not match the controller requirements.
`ControllerInstalled`	`True`	The Cluster Ingress Operator successfully installed the Gateway API controller.
`ControllerInstalled`	`False`	The installation failed.
`ControllerInstalled`	`Unknown`	The controller has not started the installation yet.
`CRDsReady`	`True`	The Istio CRDs are installed and actively managed by either the Cluster Ingress Operator or OLM.
`CRDsReady`	`False`	The CRDs were installed by a third party or have mixed ownership, preventing the controller from managing them.
`CRDsReady`	`Unknown`	The CRDs are not installed yet.

Gateway and listener status conditions reference

To verify that your gateway is configured in the data plane and ready to route traffic, review its gateway-level and listener-level status conditions. A healthy Gateway custom resource (CR) reports a status of True for its Accepted and Programmed conditions.

warning

The Conflicted listener condition uses negative polarity. This means that a status of False indicates a healthy state, while a status of True indicates an error.

Gateway-level status conditions

Condition	Status	Description and common reasons
`Accepted`	`True`	The gateway configuration is valid and working properly.
`Accepted`	`False`	The configuration has errors. Common reasons include `ListenersNotValid` (one or more listeners have issues) or `InvalidParameters` (the configuration is invalid).
`Accepted`	`Unknown`	The controller has not evaluated the gateway yet.
`Programmed`	`True`	The infrastructure is provisioned and the gateway is configured in the data plane, such as a load balancer or proxy.
`Programmed`	`False`	Programming failed or the data plane is not ready. Common reasons include `NoResources` (insufficient resources or pods unavailable), `Invalid` (cannot apply to the data plane), or `Pending`.
`Programmed`	`Unknown`	Programming is currently in progress.
`LoadBalancerReady`	`True`	The cloud load balancer service for the gateway is successfully provisioned.
`LoadBalancerReady`	`False`	The load balancer service failed to provision or is pending. Common reasons include `ServiceNotFound`, `LoadBalancerPending`, or `SyncLoadBalancerFailed`.
`DNSReady`	`True`	DNS records for all listeners are functioning correctly.
`DNSReady`	`False`	One or more listeners have DNS provisioning issues.

Listener-level status conditions

Condition	Status	Description and common reasons
`Accepted`	`True`	The listener configuration is valid and working properly.
`Accepted`	`False`	The listener configuration has errors.
`Programmed`	`True`	The listener is successfully configured in the data plane.
`Programmed`	`False`	The listener configuration failed in the data plane.
`ResolvedRefs`	`True`	All references, such as TLS certificates, are found and valid.
`ResolvedRefs`	`False`	At least one reference is invalid. Common reasons include `InvalidCertificateRef` (a TLS certificate was not found or is invalid) or `RefNotPermitted` (a cross-namespace reference is not allowed).
`Conflicted` (Negative polarity)	`False`	Healthy state. There are no conflicts.
`Conflicted` (Negative polarity)	`True`	The listener conflicts with another listener. Common reasons include `ProtocolConflict` (multiple listeners on the same port with incompatible protocols) or `HostnameConflict` (overlapping hostnames).
`DNSReady`	`True`	The DNS record for this listener's hostname is successfully provisioned in all reported zones.
`DNSReady`	`False`	The DNS record failed to provision. Common reasons include `FailedZones`, `NoDNSZones`, or `RecordNotFound`.
`DNSReady`	`Unknown`	The DNS status cannot be determined or is unmanaged. Note Listeners without a configured hostname will not have DNS conditions added to their `status`.

Example Gateway CR status output showing a DNS failure on one listener
# ...
status:
  # Gateway-level conditions (LoadBalancer and aggregate DNS status)
  conditions:
  - type: LoadBalancerReady
    status: "True"
    reason: LoadBalancerProvisioned
    message: "The LoadBalancer service is provisioned"
    observedGeneration: 1
    lastTransitionTime: "2025-01-12T10:00:00Z"
  - type: DNSReady
    status: "False"
    reason: SomeListenersNotReady
    message: "One or more listeners have DNS provisioning issues"
    observedGeneration: 1
    lastTransitionTime: "2025-01-12T10:00:00Z"

  # Listener-level conditions (DNS status per listener)
  listeners:
  - name: <stage_http>
    conditions:
    - type: DNSReady
      status: "True"
      reason: NoFailedZones
      message: "The record is provisioned in all reported zones."
      observedGeneration: 1
      lastTransitionTime: "2025-01-12T10:00:00Z"
  - name: <prod_https>
    conditions:
    - type: DNSReady
      status: "False"
      reason: FailedZones
      message: "The record failed to provision in some zones: [<prod.example.com>]"
      observedGeneration: 1
      lastTransitionTime: "2025-01-12T10:00:00Z"

note

For Google Cloud installations, you can use a custom DNS solution. You must manually create a DNS record for any gateways in Gateway API. For more information, see "Installing a cluster on Google Cloud with customizations".

Querying Gateway infrastructure status using the CLI

To quickly check the health of your gateway infrastructure, query specific status fields using the OpenShift Container Platform CLI. You can validate your deployment, check route attachments, and retrieve IP addresses without parsing lengthy YAML manifests.

Prerequisites

You have access to the cluster as a user with the cluster-admin role.
You have installed the OpenShift CLI (oc).
Your gateway is deployed in the openshift-ingress namespace.
Your gateway is managed by the gateway controller (openshift.io/gateway-controller/v1).

Procedure

Run the relevant command for the status information you need to retrieve:
- To list all GatewayClass custom resources (CRs) in your cluster, run the following command:
```
$ oc get gatewayclass
```
- To check if a specific GatewayClass CR has been accepted by the controller, run the following command:
```
$ oc get gatewayclass <gatewayclass_name> -o jsonpath='{.status.conditions[?(@.type=="Accepted")].status}'
```
  - <gatewayclass_name>: Specify the name of your gateway class.
- To list all Gateway custom resources (CRs) across all namespaces, run the following command:
```
$ oc get gateway -A
```
- To check if a specific Gateway CR is successfully programmed in the data plane, run the following command:
```
$ oc get gateway <gateway_name> -n openshift-ingress -o jsonpath='{.status.conditions[?(@.type=="Programmed")].status}'
```
  - <gateway_name>: Specify the name of your gateway.
- To retrieve the IP address assigned to a specific Gateway CR, run the following command:
```
$ oc get gateway <gateway_name> -n openshift-ingress -o jsonpath='{.status.addresses[0].value}'
```
  - <gateway_name>: Specify the name of your gateway.
- To check the total number of routes attached to a specific Gateway CR, run the following command:
```
$ oc get gateway <gateway_name> -n openshift-ingress -o jsonpath='{.status.listeners[*].attachedRoutes}'
```
  - <gateway_name>: Specify the name of your gateway.
- To watch a specific Gateway CR for real-time status changes, run the following command:
```
$ oc get gateway <gateway_name> -n openshift-ingress -w
```
  - <gateway_name>: Specify the name of your gateway.

Additional resources

Installing a cluster on Google Cloud with customizations

GatewayClass status conditions reference​

Gateway and listener status conditions reference​

Querying Gateway infrastructure status using the CLI​

GatewayClass status conditions reference

Gateway and listener status conditions reference

Querying Gateway infrastructure status using the CLI