Placing pods on specific nodes using node selectors

You can use a node selector to specify a map of key/value pairs that you define by using custom labels on nodes and selectors specified in pods. For the pod to be eligible to run on a node, the pod must have the same key/value node selector as the label on the node.

About node selectors

You can use node selectors on pods and labels on nodes to control where the pod is scheduled. With node selectors, OpenShift Container Platform schedules the pods on nodes that contain matching labels.

You can use a node selector to place specific pods on specific nodes, cluster-wide node selectors to place new pods on specific nodes anywhere in the cluster, and project node selectors to place new pods in a project on specific nodes.

For example, as a cluster administrator, you can create an infrastructure where application developers can deploy pods only onto the nodes closest to their geographical location by including a node selector in every pod they create. In this example, the cluster consists of five data centers spread across two regions. In the U.S., label the nodes as us-east, us-central, or us-west. In the Asia-Pacific region (APAC), label the nodes as apac-east or apac-west. The developers can add a node selector to the pods they create to ensure the pods get scheduled on those nodes.

A pod is not scheduled if the Pod object contains a node selector, but no node has a matching label.

warning

If you are using node selectors and node affinity in the same pod configuration, the following rules control pod placement onto nodes:

• If you configure both nodeSelector and nodeAffinity, both conditions must be satisfied for the pod to be scheduled onto a candidate node.
• If you specify multiple nodeSelectorTerms associated with nodeAffinity types, then the pod can be scheduled onto a node if one of the nodeSelectorTerms is satisfied.
• If you specify multiple matchExpressions associated with nodeSelectorTerms, then the pod can be scheduled onto a node only if all matchExpressions are satisfied.

Node selectors on specific pods and nodes

You can control which node a specific pod is scheduled on by using node selectors and labels. To use node selectors and labels, first label the node to avoid pods being descheduled, then add the node selector to the pod.

note

You cannot add a node selector directly to an existing scheduled pod. You must label the object that controls the pod, such as deployment config.

For example, the following Node object has the region: east label:

Sample Node object with a label

kind: Node
apiVersion: v1
metadata:
  name: ip-10-0-131-14.ec2.internal
  selfLink: /api/v1/nodes/ip-10-0-131-14.ec2.internal
  uid: 7bc2580a-8b8e-11e9-8e01-021ab4174c74
  resourceVersion: '478704'
  creationTimestamp: '2019-06-10T14:46:08Z'
  labels:
    kubernetes.io/os: linux
    topology.kubernetes.io/zone: us-east-1a
    node.openshift.io/os_version: '4.5'
    node-role.kubernetes.io/worker: ''
    topology.kubernetes.io/region: us-east-1
    node.openshift.io/os_id: rhcos
    node.kubernetes.io/instance-type: m4.large
    kubernetes.io/hostname: ip-10-0-131-14
    kubernetes.io/arch: amd64
    region: east
    type: user-node
#...

In this example, the region: east and type: user-node labels must match the pod node selector. A pod has the type: user-node,region: east node selector:

Sample Pod object with node selectors

apiVersion: v1
kind: Pod
metadata:
  name: s1
#...
spec:
  nodeSelector:
    region: east
    type: user-node
#...

where:

spec.nodeSelector

Specifies the node selectors to match the node label. The node must have a label for each node selector. When you create the pod using the example pod spec, it can be scheduled on the example node.

Default cluster-wide node selectors

With default cluster-wide node selectors, when you create a pod in that cluster, OpenShift Container Platform adds the default node selectors to the pod and schedules the pod on nodes with matching labels. For example, the following Scheduler object has the default cluster-wide region=east and type=user-node node selectors:

Example Scheduler Operator Custom Resource

apiVersion: config.openshift.io/v1
kind: Scheduler
metadata:
  name: cluster
#...
spec:
  defaultNodeSelector: type=user-node,region=east
#...

A node in that cluster has the type=user-node,region=east labels:

Example Node object

apiVersion: v1
kind: Node
metadata:
  name: ci-ln-qg1il3k-f76d1-hlmhl-worker-b-df2s4
#...
  labels:
    region: east
    type: user-node
#...

Example Pod object with a node selector

apiVersion: v1
kind: Pod
metadata:
  name: s1
#...
spec:
  nodeSelector:
    region: east
#...

When you create the pod using the example pod spec in the example cluster, the pod is created with the cluster-wide node selector and is scheduled on the labeled node:

Example pod list with the pod on the labeled node

NAME     READY   STATUS    RESTARTS   AGE   IP           NODE                                       NOMINATED NODE   READINESS GATES
pod-s1   1/1     Running   0          20s   10.131.2.6   ci-ln-qg1il3k-f76d1-hlmhl-worker-b-df2s4   <none>           <none>

note

If the project where you create the pod has a project node selector, that selector takes preference over a cluster-wide node selector. Your pod is not created or scheduled if the pod does not have the project node selector.

Project node selectors

With project node selectors, when you create a pod in this project, OpenShift Container Platform adds the node selectors to the pod and schedules the pods on a node with matching labels. If there is a cluster-wide default node selector, a project node selector takes preference. For example, the following project has the region=east node selector:

Example Namespace object

apiVersion: v1
kind: Namespace
metadata:
  name: east-region
  annotations:
    openshift.io/node-selector: "region=east"
#...

The following node has the type=user-node,region=east labels:

Example Node object

apiVersion: v1
kind: Node
metadata:
  name: ci-ln-qg1il3k-f76d1-hlmhl-worker-b-df2s4
#...
  labels:
    region: east
    type: user-node
#...

When you create the pod using the example pod spec in this example project, the pod is created with the project node selectors and is scheduled on the labeled node:

Example Pod object

apiVersion: v1
kind: Pod
metadata:
  namespace: east-region
#...
spec:
  nodeSelector:
    region: east
    type: user-node
#...

Example pod list with the pod on the labeled node

NAME     READY   STATUS    RESTARTS   AGE   IP           NODE                                       NOMINATED NODE   READINESS GATES
pod-s1   1/1     Running   0          20s   10.131.2.6   ci-ln-qg1il3k-f76d1-hlmhl-worker-b-df2s4   <none>           <none>

A pod in the project is not created or scheduled if the pod contains different node selectors. For example, if you deploy the following pod into the example project, it is not created:

Example Pod object with an invalid node selector

apiVersion: v1
kind: Pod
metadata:
  name: west-region
#...
spec:
  nodeSelector:
    region: west
#...

Use node selectors to control pod placement

You can use node selectors on pods and labels on nodes to control where the pod is scheduled. With node selectors, OpenShift Container Platform schedules the pods on nodes that contain matching labels.

You add labels to a node, a compute machine set, or a machine config. Adding the label to the compute machine set ensures that if the node or machine goes down, new nodes have the label. Labels added to a node or machine config do not persist if the node or machine goes down.

To add node selectors to an existing pod, add a node selector to the controlling object for that pod, such as a ReplicaSet object, DaemonSet object, StatefulSet object, Deployment object, or DeploymentConfig object. Any existing pods under that controlling object are recreated on a node with a matching label. If you are creating a new pod, you can add the node selector directly to the pod spec. If the pod does not have a controlling object, you must delete the pod, edit the pod spec, and recreate the pod.

note

You cannot add a node selector directly to an existing scheduled pod.

Prerequisites

To add a node selector to existing pods, determine the controlling object for that pod. For example, the router-default-66d5cf9464-m2g75 pod is controlled by the router-default-66d5cf9464 replica set:

$ oc describe pod router-default-66d5cf9464-7pwkc

The output appears similar to the following example:

kind: Pod
apiVersion: v1
metadata:
# ...
Name:               router-default-66d5cf9464-7pwkc
Namespace:          openshift-ingress
# ...
Controlled By:      ReplicaSet/router-default-66d5cf9464
# ...

The web console lists the controlling object under ownerReferences in the pod YAML:

apiVersion: v1
kind: Pod
metadata:
  name: router-default-66d5cf9464-7pwkc
# ...
  ownerReferences:
    - apiVersion: apps/v1
      kind: ReplicaSet
      name: router-default-66d5cf9464
      uid: d81dd094-da26-11e9-a48a-128e7edf0312
      controller: true
      blockOwnerDeletion: true
# ...

Procedure

1. Add labels to a node by using a compute machine set or editing the node directly:
   • Use a MachineSet object to add labels to nodes managed by the compute machine set when a node is created:

     1. Run the following command to add labels to a MachineSet object:

        $ oc patch MachineSet <name> --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"<key>"="<value>","<key>"="<value>"}}]'  -n openshift-machine-api

        For example:

        $ oc patch MachineSet abc612-msrtw-worker-us-east-1c  --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"type":"user-node","region":"east"}}]'  -n openshift-machine-api

        tip

        You can alternatively apply the following YAML to add labels to a compute machine set:

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
        metadata:
          name: xf2bd-infra-us-east-2a
          namespace: openshift-machine-api
        spec:
          template:
            spec:
              metadata:
                labels:
                  region: "east"
                  type: "user-node"
        # ...

     2. Verify that the labels are added to the MachineSet object by using the oc edit command: For example:

        $ oc edit MachineSet abc612-msrtw-worker-us-east-1c -n openshift-machine-api

        The output appears similar to the following example:

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
        
        # ...
        
        spec:
        # ...
          template:
            metadata:
        # ...
            spec:
              metadata:
                labels:
                  region: east
                  type: user-node
        # ...

   • Add labels directly to a node:

     1. Edit the Node object for the node:

        $ oc label nodes <name> <key>=<value>

        For example, to label a node:

        $ oc label nodes ip-10-0-142-25.ec2.internal type=user-node region=east

        tip

        You can alternatively apply the following YAML to add labels to a node:

        kind: Node
        apiVersion: v1
        metadata:
          name: hello-node-6fbccf8d9
          labels:
            type: "user-node"
            region: "east"
        # ...

     2. Verify that the labels are added to the node:

        $ oc get nodes -l type=user-node,region=east

        Example output

        NAME                          STATUS   ROLES    AGE   VERSION
        ip-10-0-142-25.ec2.internal   Ready    worker   17m   v1.35.4

2. Add the matching node selector to a pod:

   • To add a node selector to existing and future pods, add a node selector to the controlling object for the pods:

     Example ReplicaSet object with labels

     kind: ReplicaSet
     apiVersion: apps/v1
     metadata:
       name: hello-node-6fbccf8d9
     # ...
     spec:
     # ...
       template:
         metadata:
           creationTimestamp: null
           labels:
             ingresscontroller.operator.openshift.io/deployment-ingresscontroller: default
             pod-template-hash: 66d5cf9464
         spec:
           nodeSelector:
             kubernetes.io/os: linux
             node-role.kubernetes.io/worker: ''
             type: user-node
     # ...

     where:

     spec.template.spec.nodeSelector

     Specifies the node selectors .

   • To add a node selector to a specific, new pod, add the selector to the Pod object directly:

     Example Pod object with a node selector

     apiVersion: v1
     kind: Pod
     metadata:
       name: hello-node-6fbccf8d9
     # ...
     spec:
       nodeSelector:
         region: east
         type: user-node
     # ...

     note

     You cannot add a node selector directly to an existing scheduled pod.

Create default cluster-wide node selectors

You can use default cluster-wide node selectors on pods together with labels on nodes to constrain all pods created in a cluster to specific nodes.

With cluster-wide node selectors, when you create a pod in that cluster, OpenShift Container Platform adds the default node selectors to the pod and schedules the pod on nodes with matching labels.

You configure cluster-wide node selectors by editing the Scheduler Operator custom resource (CR). You add labels to a node, a compute machine set, or a machine config. Adding the label to the compute machine set ensures that if the node or machine goes down, new nodes have the label. Labels added to a node or machine config do not persist if the node or machine goes down.

note

You can add additional key/value pairs to a pod. But you cannot add a different value for a default key.

The following procedure adds a default cluster-wide node selector.

Procedure

1. Edit the Scheduler Operator CR to add the default cluster-wide node selectors:

   $ oc edit scheduler cluster

   Example Scheduler Operator CR with a node selector

   apiVersion: config.openshift.io/v1
   kind: Scheduler
   metadata:
     name: cluster
   ...
   spec:
     defaultNodeSelector: type=user-node,region=east
     mastersSchedulable: false

   where:

   spec.defaultNodeSelector

   Specifies a node selector with the appropriate <key>:<value> pairs.

   After making this change, wait for the pods in the openshift-kube-apiserver project to redeploy. This can take several minutes. The default cluster-wide node selector does not take effect until the pods redeploy.

2. Add labels to a node by using a compute machine set or editing the node directly:

   • Use a compute machine set to add labels to nodes managed by the compute machine set when a node is created:

     1. Run the following command to add labels to a MachineSet object:

        $ oc patch MachineSet <name> --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"<key>"="<value>","<key>"="<value>"}}]'  -n openshift-machine-api

        Add a <key>/<value> pair for each label.

        For example:

        $ oc patch MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"type":"user-node","region":"east"}}]'  -n openshift-machine-api

        tip

        You can alternatively apply the following YAML to add labels to a compute machine set:

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
        metadata:
          name: <machineset>
          namespace: openshift-machine-api
        spec:
          template:
            spec:
              metadata:
                labels:
                  region: "east"
                  type: "user-node"

     2. Verify that the labels are added to the MachineSet object by using the oc edit command: For example:

        $ oc edit MachineSet abc612-msrtw-worker-us-east-1c -n openshift-machine-api

        Example MachineSet object

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
          ...
        spec:
          ...
          template:
            metadata:
          ...
            spec:
              metadata:
                labels:
                  region: east
                  type: user-node
          ...

     3. Redeploy the nodes associated with that compute machine set by scaling down to 0 and scaling up the nodes: For example:

        $ oc scale --replicas=0 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

        $ oc scale --replicas=1 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

     4. When the nodes are ready and available, verify that the label is added to the nodes by using the oc get command:

        $ oc get nodes -l <key>=<value>

        For example:

        $ oc get nodes -l type=user-node

        Example output

        NAME                                       STATUS   ROLES    AGE   VERSION
        ci-ln-l8nry52-f76d1-hl7m7-worker-c-vmqzp   Ready    worker   61s   v1.35.4

   • Add labels directly to a node:

     1. Edit the Node object for the node:

        $ oc label nodes <name> <key>=<value>

        For example, to label a node:

        $ oc label nodes ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49 type=user-node region=east

        tip

        You can alternatively apply the following YAML to add labels to a node:

        kind: Node
        apiVersion: v1
        metadata:
          name: <node_name>
          labels:
            type: "user-node"
            region: "east"

     2. Verify that the labels are added to the node using the oc get command:

        $ oc get nodes -l <key>=<value>,<key>=<value>

        For example:

        $ oc get nodes -l type=user-node,region=east

        Example output

        NAME                                       STATUS   ROLES    AGE   VERSION
        ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49   Ready    worker   17m   v1.35.4

Create project-wide node selectors

You can use node selectors in a project together with labels on nodes to constrain all pods created in that project to the labeled nodes.

When you create a pod in this project, OpenShift Container Platform adds the node selectors to the pods in the project and schedules the pods on a node with matching labels in the project. If there is a cluster-wide default node selector, a project node selector takes preference.

You add node selectors to a project by editing the Namespace object to add the openshift.io/node-selector parameter. You add labels to a node, a compute machine set, or a machine config. Adding the label to the compute machine set ensures that if the node or machine goes down, new nodes have the label. Labels added to a node or machine config do not persist if the node or machine goes down.

A pod is not scheduled if the Pod object contains a node selector, but no project has a matching node selector. When you create a pod from that spec, you receive an error similar to the following message:

Error from server (Forbidden): error when creating "pod.yaml": pods "pod-4" is forbidden: pod node label selector conflicts with its project node label selector

note

You can add additional key/value pairs to a pod. But you cannot add a different value for a project key.

The following procedure adds a default project node selector.

Procedure

1. Create a namespace or edit an existing namespace to add the openshift.io/node-selector parameter:

   $ oc edit namespace <name>

   Example output

   apiVersion: v1
   kind: Namespace
   metadata:
     annotations:
       openshift.io/node-selector: "type=user-node,region=east"
       openshift.io/description: ""
       openshift.io/display-name: ""
       openshift.io/requester: kube:admin
       openshift.io/sa.scc.mcs: s0:c30,c5
       openshift.io/sa.scc.supplemental-groups: 1000880000/10000
       openshift.io/sa.scc.uid-range: 1000880000/10000
     creationTimestamp: "2021-05-10T12:35:04Z"
     labels:
       kubernetes.io/metadata.name: demo
     name: demo
     resourceVersion: "145537"
     uid: 3f8786e3-1fcb-42e3-a0e3-e2ac54d15001
   spec:
     finalizers:
     - kubernetes

   Add the openshift.io/node-selector annotation with the appropriate <key>:<value> pairs.

2. Add labels to a node by using a compute machine set or editing the node directly:

   • Use a MachineSet object to add labels to nodes managed by the compute machine set when a node is created:

     1. Run the following command to add labels to a MachineSet object:

        $ oc patch MachineSet <name> --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"<key>"="<value>","<key>"="<value>"}}]'  -n openshift-machine-api

        For example:

        $ oc patch MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c --type='json' -p='[{"op":"add","path":"/spec/template/spec/metadata/labels", "value":{"type":"user-node","region":"east"}}]'  -n openshift-machine-api

        tip

        You can alternatively apply the following YAML to add labels to a compute machine set:

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
        metadata:
          name: <machineset>
          namespace: openshift-machine-api
        spec:
          template:
            spec:
              metadata:
                labels:
                  region: "east"
                  type: "user-node"

     2. Verify that the labels are added to the MachineSet object by using the oc edit command: For example:

        $ oc edit MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

        Example output

        apiVersion: machine.openshift.io/v1beta1
        kind: MachineSet
        metadata:
        ...
        spec:
        ...
          template:
            metadata:
        ...
            spec:
              metadata:
                labels:
                  region: east
                  type: user-node

     3. Redeploy the nodes associated with that compute machine set: For example:

        $ oc scale --replicas=0 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

        $ oc scale --replicas=1 MachineSet ci-ln-l8nry52-f76d1-hl7m7-worker-c -n openshift-machine-api

     4. When the nodes are ready and available, verify that the label is added to the nodes by using the oc get command:

        $ oc get nodes -l <key>=<value>

        For example:

        $ oc get nodes -l type=user-node,region=east

        Example output

        NAME                                       STATUS   ROLES    AGE   VERSION
        ci-ln-l8nry52-f76d1-hl7m7-worker-c-vmqzp   Ready    worker   61s   v1.35.4

   • Add labels directly to a node:

     1. Edit the Node object to add labels:

        $ oc label <resource> <name> <key>=<value>

        For example, to label a node:

        $ oc label nodes ci-ln-l8nry52-f76d1-hl7m7-worker-c-tgq49 type=user-node region=east

        tip

        You can alternatively apply the following YAML to add labels to a node:

        kind: Node
        apiVersion: v1
        metadata:
          name: <node_name>
          labels:
            type: "user-node"
            region: "east"

     2. Verify that the labels are added to the Node object using the oc get command:

        $ oc get nodes -l <key>=<value>

        For example:

        $ oc get nodes -l type=user-node,region=east

        Example output

        NAME                                       STATUS   ROLES    AGE   VERSION
        ci-ln-l8nry52-f76d1-hl7m7-worker-b-tgq49   Ready    worker   17m   v1.35.4

Additional resources

• Creating a project with a node selector and toleration