Skip to content

Installing a cluster on AWS with customizations

In OpenShift Container Platform version 4.22, you can install a cluster on Amazon Web Services (AWS) by using installer-provisioned infrastructure with customizations, including network configuration options.

In each, you modify parameters in the install-config.yaml file before you install the cluster. By customizing your network configuration, your cluster can coexist with existing IP address allocations in your environment and integrate with existing MTU and VXLAN configurations.

You must set most of the network configuration parameters during installation, and you can modify only kubeProxy configuration parameters in a running cluster.

Note

The scope of the OpenShift Container Platform installation configurations is intentionally narrow. It is designed for simplicity and ensured success. You can complete many more OpenShift Container Platform configuration tasks after an installation completes.

Prerequisites

Before you install a cluster on Amazon Web Services (AWS) by using installer-provisioned infrastructure with customizations, you must meet several prerequisites.

The following prerequisites must be met:

Obtaining an AWS Marketplace image

If you are deploying an OpenShift Container Platform cluster by using an Amazon Web Services (AWS) Marketplace image, you must first subscribe through AWS. Subscribing to the offer provides you with the Amazon Machine Image (AMI) ID that the installation program uses to deploy compute nodes.

Note

You should only modify the RHCOS image for compute machines to use an AWS Marketplace image. Control plane machines and infrastructure nodes do not require an OpenShift Container Platform subscription and use the public RHCOS default image by default, which does not incur subscription costs on your AWS bill. Therefore, you should not modify the cluster default boot image or the control plane boot images. Applying the AWS Marketplace image to them will incur additional licensing costs that cannot be recovered.

Prerequisites

  • You have an AWS account to buy the offer. This account does not have to be the same account that you use to install the cluster.

Procedure

  1. Complete the OpenShift Container Platform subscription from the AWS Marketplace.

  2. Record the AMI ID for your specific AWS region. As part of the installation process, you must update the install-config.yaml file with this value before deploying the cluster.

    Sample install-config.yaml file with AWS Marketplace compute nodes
    apiVersion: v1
baseDomain: example.com
compute:
- hyperthreading: Enabled
  name: worker
  platform:
    aws:
      amiID: ami-06c4d345f7c207239
      type: m5.4xlarge
  replicas: 3
metadata:
  name: test-cluster
platform:
  aws:
    region: us-east-2
sshKey: ssh-ed25519 AAAA...
pullSecret: '{"auths": ...}'

    where:

    compute.platform.aws.amiID
    Specifies the AMI ID from your AWS Marketplace subscription.
    platform.aws.region
    Specifies the platform.aws.region parameter. Your AMI ID is associated with a specific AWS region. When creating the installation configuration file, ensure that you select the same AWS region that you specified when configuring your subscription.

Network configuration phases

You can customize your OpenShift Container Platform network plugin configuration, such as cluster network CIDR and service network ranges, during two phases before installation to integrate with your existing network environment.

Phase 1

You can customize the following network-related fields in the install-config.yaml file before you create the manifest files:

  • networking.networkType
  • networking.clusterNetwork
  • networking.serviceNetwork
  • networking.machineNetwork
  • nodeNetworking

For more information, see "Installation configuration parameters".

Note

Set the networking.machineNetwork to match the Classless Inter-Domain Routing (CIDR) where the preferred subnet is located.

Warning

The CIDR range 172.17.0.0/16 is reserved by libVirt. You cannot use any other CIDR range that overlaps with the 172.17.0.0/16 CIDR range for networks in your cluster.

Phase 2
After creating the manifest files by running openshift-install create manifests, you can define a customized Cluster Network Operator manifest with only the fields you want to modify. You can use the manifest to specify an advanced network configuration.

During phase 2, you cannot override the values that you specified in phase 1 in the install-config.yaml file. However, you can customize the network plugin during phase 2.

Creating the installation configuration file

You can customize the OpenShift Container Platform cluster you install on Amazon Web Services (AWS).

Prerequisites

  • You have the OpenShift Container Platform installation program and the pull secret for your cluster.

Procedure

  1. Create the install-config.yaml file.

    1. Change to the directory that contains the installation program and run the following command:

      $ ./openshift-install create install-config --dir <installation_directory>

      • <installation_directory>: For <installation_directory>, specify the directory name to store the files that the installation program creates.

        When specifying the directory:

      • Verify that the directory has the execute permission. This permission is required to run Terraform binaries under the installation directory.

      • Use an empty directory. Some installation assets, such as bootstrap X.509 certificates, have short expiration intervals, therefore you must not reuse an installation directory. If you want to reuse individual files from another cluster installation, you can copy them into your directory. However, the file names for the installation assets might change between releases. Use caution when copying installation files from an earlier OpenShift Container Platform version.

    2. At the prompts, provide the configuration details for your cloud:

      1. Optional: Select an SSH key to use to access your cluster machines.

        Note

        For production OpenShift Container Platform clusters on which you want to perform installation debugging or disaster recovery, specify an SSH key that your ssh-agent process uses.

      2. Select AWS as the platform to target.

      3. If you do not have an Amazon Web Services (AWS) profile stored on your computer, enter the AWS access key ID and secret access key for the user that you configured to run the installation program.

      4. Select the AWS region to deploy the cluster to.

      5. Select the base domain for the Route 53 service that you configured for your cluster.

      6. Enter a descriptive name for your cluster.

  2. Modify the install-config.yaml file. You can find more information about the available parameters in the "Installation configuration parameters" section.

    Note

    If you are installing a three-node cluster, be sure to set the compute.replicas parameter to 0. This ensures that the cluster’s control planes are schedulable. For more information, see "Installing a three-node cluster on AWS".

  3. Back up the install-config.yaml file so that you can use it to install multiple clusters.

    Warning

    The install-config.yaml file is consumed during the installation process. If you want to reuse the file, you must back it up now.

Additional resources

Minimum resource requirements for cluster installation

To ensure that your OpenShift Container Platform cluster runs as expected, each cluster machine must meet minimum CPU, memory, and storage requirements.

Minimum resource requirements

Machine Operating system vCPU Virtual RAM Storage Input/Output Per Second (IOPS)
Bootstrap RHCOS 4 16 GB 100 GB 300
Control plane RHCOS 4 16 GB 100 GB 300
Compute RHCOS 2 8 GB 100 GB 300
  • One vCPU is equal to one physical core when simultaneous multithreading (SMT), or Hyper-Threading, is not enabled. When enabled, use the following formula to calculate the corresponding ratio: (threads per core × cores) × sockets = vCPUs.
  • OpenShift Container Platform and Kubernetes are sensitive to disk performance, and Red Hat recommends faster storage, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. On many cloud platforms, storage size and IOPS scale together, so you might need to provision more storage to get enough performance.
  • As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. OpenShift Container Platform 4.10 and later do not support RHEL 7 compute machines.

Note

In OpenShift Container Platform version 4.22, RHCOS uses RHEL version 9.8, which updates the micro-architecture requirements. Each architecture requires the following minimum instruction set architectures (ISA):

  • x86-64 architecture requires x86-64-v2 ISA
  • ARM64 architecture requires ARMv8.0-A ISA
  • ppc64le architecture requires IBM(R) Power9 ISA
  • s390x architecture requires IBM(R) z14 ISA

For more information, see Architectures in the RHEL documentation.

If an instance type for your platform meets the minimum requirements for cluster machines, it is supported to use in OpenShift Container Platform.

Additional resources

Tested instance types for AWS

To ensure cluster stability and performance, use one of the tested Amazon Web Services (AWS) instance types for your OpenShift Container Platform machines.

The following AWS instance types have been tested with OpenShift Container Platform.

Note

Use the machine types included in the following charts for your AWS instances. If you use an instance type that is not listed in the chart, ensure that the instance size you use matches the minimum resource requirements in "Minimum resource requirements for cluster installation".

See the following machine types based on 64-bit x86 architecture:

  • c4.*
  • c5.*
  • c5a.*
  • i3.*
  • m4.*
  • m5.*
  • m5a.*
  • m6a.*
  • m6i.*
  • m7a.*
  • m7i.*
  • m7i-flex.*
  • r4.*
  • r5.*
  • r5a.*
  • r6i.*
  • t3.*
  • t3a.*

Tested instance types for AWS on 64-bit ARM infrastructures

To ensure cluster stability and performance, use one of the tested Amazon Web Services (AWS) 64-bit ARM instance types for your OpenShift Container Platform machines.

The following AWS 64-bit ARM instance types have been tested with OpenShift Container Platform.

Note

Use the machine types included in the following charts for your AWS ARM instances. If you use an instance type that is not listed in the chart, ensure that the instance size you use matches the minimum resource requirements listed in "Minimum resource requirements for cluster installation".

See the following machine types based on 64-bit ARM architecture:

  • c6g.*
  • c7g.*
  • c8g.*
  • m6g.*
  • m7g.*
  • m7gd.*
  • r8g.*

Enabling a user-managed DNS

You can install a cluster with a domain name server (DNS) solution that you manage instead of the default cluster-provisioned DNS solution that uses the Route 53 service for Amazon Web Services (AWS).

For example, your organization’s security policies might not allow the use of public DNS services such as Amazon Web Services DNS. In such scenarios, you can use your own DNS service to bypass the public DNS service and manage your own DNS for the IP addresses of the API and Ingress services.

If you enable user-managed DNS during installation, the installation program provisions DNS records for the API and Ingress services only within the cluster. To ensure access from outside the cluster, you must provision the DNS records in an external DNS service of your choice for the API and Ingress services after installation.

Warning

User-provisioned DNS is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Procedure

  • Before you deploy your cluster, use a text editor to open the install-config.yaml file and add the following stanza:

    • To enable user-managed DNS:

      featureSet: CustomNoUpgrade
featureGates: ["AWSClusterHostedDNSInstall=true"]

# ...

platform:
  aws:
    userProvisionedDNS: Enabled

      where:

      userProvisionedDNS
      Enables user-provisioned DNS management.

Next steps

For information about provisioning your DNS records for the API server and the Ingress services, see "Provisioning your own DNS records".

Sample customized install-config.yaml file for AWS

You can customize the installation configuration file (install-config.yaml) to specify more details about your OpenShift Container Platform cluster’s platform or modify the values of the required parameters.

Warning

This sample YAML file is provided for reference only. You must obtain your install-config.yaml file by using the installation program and modify it. For a full list and description of all installation configuration parameters, see Installation configuration parameters for AWS.

Sample install-config.yaml file for AWS
apiVersion: v1
baseDomain: example.com
sshKey: ssh-ed25519 AAAA...
pullSecret: '{"auths": ...}'
metadata:
  name: example-cluster
controlPlane:
  name: master
  platform:
    aws:
      type: m6i.xlarge
  replicas: 3
compute:
-  name: worker
  platform:
    aws:
      type: c5.4xlarge
  replicas: 3
networking:
  clusterNetwork:
  - cidr: 10.128.0.0/14
    hostPrefix: 23
platform:
  aws:
    region: us-west-2
  • Parameters at the first level of indentation apply to the cluster globally.
  • The controlPlane stanza applies to control plane machines.
  • The compute stanza applies to compute machines.
  • The networking stanza applies to the cluster networking configuration. If you do not provide networking values, the installation program provides default values.
  • The platform stanza applies to the infrastructure platform that hosts the cluster.

Additional resources

Configuring the cluster-wide proxy during installation

Production environments can deny direct access to the internet and instead have an HTTP or HTTPS proxy available. You can configure a new OpenShift Container Platform cluster to use a proxy by configuring the proxy settings in the install-config.yaml file.

Prerequisites

  • You have an existing install-config.yaml file.

  • You have reviewed the sites that your cluster requires access to and determined whether any of them need to bypass the proxy. By default, the proxy handles all cluster egress traffic, including calls to hosting cloud provider APIs. You added sites to the Proxy object’s spec.noProxy field to bypass the proxy if necessary.

    Note

    The Proxy object status.noProxy field includes the values of the networking.machineNetwork[].cidr, networking.clusterNetwork[].cidr, and networking.serviceNetwork[] fields from your installation configuration.

    For installations on Amazon Web Services (AWS), Google Cloud, Microsoft Azure, and Red Hat OpenStack Platform (RHOSP), the Proxy object status.noProxy field also includes the instance metadata endpoint (169.254.169.254).

Procedure

  1. Edit your install-config.yaml file and add the proxy settings. For example:

    apiVersion: v1
baseDomain: my.domain.com
proxy:
  httpProxy: http://<username>:<pswd>@<ip>:<port>
  httpsProxy: https://<username>:<pswd>@<ip>:<port>
  noProxy: ec2.<aws_region>.amazonaws.com,elasticloadbalancing.<aws_region>.amazonaws.com,s3.<aws_region>.amazonaws.com
additionalTrustBundle: |
    -----BEGIN CERTIFICATE-----
    <MY_TRUSTED_CA_CERT>
    -----END CERTIFICATE-----
additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle>
# ...

    where:

    proxy.httpProxy
    Specifies a proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.
    proxy.httpsProxy
    Specifies a proxy URL to use for creating HTTPS connections outside the cluster.
    proxy.noProxy
    Specifies a comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations. If you have added the Amazon EC2, Elastic Load Balancing, and S3 VPC endpoints to your VPC, you must add these endpoints to the noProxy field.
    additionalTrustBundle
    If you specify this value, the installation program generates a config map named user-ca-bundle in the openshift-config namespace to hold the additional CA certificates. If you specify additionalTrustBundle and at least one proxy setting, the Proxy object references the user-ca-bundle config map in the trustedCA field. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges the contents specified for the trustedCA parameter with the RHCOS trust bundle. You must set the additionalTrustBundle field unless an authority from the RHCOS trust bundle signs the proxy’s identity certificate.
    additionalTrustBundlePolicy
    Specifies the policy that determines the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when you configure an http/https proxy. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly. Optional parameter.

    Note

    The installation program does not support the proxy readinessEndpoints field.

    Note

    If the installation program times out, restart and then complete the deployment by using the wait-for command of the installation program. For example:

    $ ./openshift-install wait-for install-complete --log-level debug

  2. Save the file and reference it when installing OpenShift Container Platform.

    The installation program creates a cluster-wide proxy named cluster that uses the proxy settings in the install-config.yaml file. If you do not give proxy settings, the installation program still creates a cluster Proxy object, but it has a nil spec.

    Note

    Only the Proxy object named cluster is supported, and you cannot create additional proxies.

Alternatives to storing administrator-level secrets in the kube-system project

By default, administrator secrets are stored in the kube-system project.

If you configured the credentialsMode parameter in the install-config.yaml file to Manual, you must use one of the following alternatives:

  • To manage long-term cloud credentials manually, follow the procedure in "Manually creating long-term credentials".
  • To implement short-term credentials that are managed outside the cluster for individual components, follow the procedures in "Configuring an AWS cluster to use short-term credentials".

Manually creating long-term credentials

You can put the Cloud Credential Operator (CCO) into manual mode before OpenShift Container Platform installation if the cloud identity and access management (IAM) APIs are not reachable, or if you prefer not to store an administrator-level credential secret in the cluster kube-system namespace.

Procedure

  1. If you did not set the credentialsMode parameter in the install-config.yaml configuration file to Manual, modify the value as shown:

    Sample configuration file snippet
    apiVersion: v1
baseDomain: example.com
credentialsMode: Manual
# ...

  2. If you have not previously created installation manifest files, do so by running the following command:

    $ openshift-install create manifests --dir <installation_directory>

    where <installation_directory> is the directory in which the installation program creates files.

  3. Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:

    $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')

  4. Extract the list of CredentialsRequest custom resources (CRs) from the OpenShift Container Platform release image by running the following command:

    $ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \
  --to=<path_to_directory_for_credentials_requests>

    where:

    --included
    Specifies only the manifests that your specific cluster configuration requires.
    <path_to_directory_with_installation_configuration>
    Specifies the location of the install-config.yaml file.
    <path_to_directory_for_credentials_requests>
    Specifies the path to the directory where you want to store the CredentialsRequest objects. If the specified directory does not exist, this command creates it. This command creates a YAML file for each CredentialsRequest object.
    Sample CredentialsRequest object
    apiVersion: cloudcredential.openshift.io/v1
kind: CredentialsRequest
metadata:
  name: <component_credentials_request>
  namespace: openshift-cloud-credential-operator
  ...
spec:
  providerSpec:
    apiVersion: cloudcredential.openshift.io/v1
    kind: AWSProviderSpec
    statementEntries:
    - effect: Allow
      action:
      - iam:GetUser
      - iam:GetUserPolicy
      - iam:ListAccessKeys
      resource: "*"
  ...

  5. Create YAML files for secrets in the openshift-install manifests directory that you generated previously. The secrets must be stored using the namespace and secret name defined in the spec.secretRef for each CredentialsRequest object.

    Sample CredentialsRequest object with secrets
    apiVersion: cloudcredential.openshift.io/v1
kind: CredentialsRequest
metadata:
  name: <component_credentials_request>
  namespace: openshift-cloud-credential-operator
  ...
spec:
  providerSpec:
    apiVersion: cloudcredential.openshift.io/v1
    kind: AWSProviderSpec
    statementEntries:
    - effect: Allow
      action:
      - s3:CreateBucket
      - s3:DeleteBucket
      resource: "*"
      ...
  secretRef:
    name: <component_secret>
    namespace: <component_namespace>
  ...
    Sample Secret object
    apiVersion: v1
kind: Secret
metadata:
  name: <component_secret>
  namespace: <component_namespace>
data:
  aws_access_key_id: <base64_encoded_aws_access_key_id>
  aws_secret_access_key: <base64_encoded_aws_secret_access_key>

    Warning

    Before upgrading a cluster that uses manually maintained credentials, you must ensure that the CCO is in an upgradeable state.

Configuring an AWS cluster to use short-term credentials

To install a cluster that is configured to use the AWS Security Token Service (STS), you must configure the CCO utility and create the required AWS resources for your cluster.

Configuring the Cloud Credential Operator utility

To create and manage cloud credentials from outside of the cluster when the Cloud Credential Operator (CCO) is operating in manual mode, extract and prepare the CCO utility (ccoctl) binary.

Note

The ccoctl utility is a Linux binary that must run in a Linux environment.

Prerequisites

  • You have access to an OpenShift Container Platform account with cluster administrator access.

  • You have installed the OpenShift CLI (oc).

  • You have created an AWS account for the ccoctl utility to use with the following permissions: Required iam permissions

    • iam:CreateOpenIDConnectProvider
    • iam:CreateRole
    • iam:DeleteOpenIDConnectProvider
    • iam:DeleteRole
    • iam:DeleteRolePolicy
    • iam:GetOpenIDConnectProvider
    • iam:GetRole
    • iam:GetUser
    • iam:ListOpenIDConnectProviders
    • iam:ListRolePolicies
    • iam:ListRoles
    • iam:PutRolePolicy
    • iam:TagOpenIDConnectProvider
    • iam:TagRole

    Required s3 permissions

    • s3:CreateBucket
    • s3:DeleteBucket
    • s3:DeleteObject
    • s3:GetBucketAcl
    • s3:GetBucketTagging
    • s3:GetObject
    • s3:GetObjectAcl
    • s3:GetObjectTagging
    • s3:ListBucket
    • s3:PutBucketAcl
    • s3:PutBucketPolicy
    • s3:PutBucketPublicAccessBlock
    • s3:PutBucketTagging
    • s3:PutObject
    • s3:PutObjectAcl
    • s3:PutObjectTagging

    Required cloudfront permissions

    • cloudfront:ListCloudFrontOriginAccessIdentities
    • cloudfront:ListDistributions
    • cloudfront:ListTagsForResource

  • If you plan to store the OIDC configuration in a private S3 bucket that is accessed by the IAM identity provider through a public CloudFront distribution URL, the AWS account that runs the ccoctl utility requires the following additional permissions:

    • cloudfront:CreateCloudFrontOriginAccessIdentity
    • cloudfront:CreateDistribution
    • cloudfront:DeleteCloudFrontOriginAccessIdentity
    • cloudfront:DeleteDistribution
    • cloudfront:GetCloudFrontOriginAccessIdentity
    • cloudfront:GetCloudFrontOriginAccessIdentityConfig
    • cloudfront:GetDistribution
    • cloudfront:TagResource
    • cloudfront:UpdateDistribution

    Note

    These additional permissions support the use of the --create-private-s3-bucket option when processing credentials requests with the ccoctl aws create-all command.

Procedure

  1. Set a variable for the OpenShift Container Platform release image by running the following command:

    $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')

  2. Obtain the CCO container image from the OpenShift Container Platform release image by running the following command:

    $ CCO_IMAGE=$(oc adm release info --image-for='cloud-credential-operator' $RELEASE_IMAGE -a ~/.pull-secret)

    Note

    Ensure that the architecture of the $RELEASE_IMAGE matches the architecture of the environment in which you will use the ccoctl tool.

  3. Extract the ccoctl binary from the CCO container image within the OpenShift Container Platform release image by running the following command:

    $ oc image extract $CCO_IMAGE \
  --file="/usr/bin/ccoctl.<rhel_version>" \
  -a ~/.pull-secret

    For <rhel_version>, specify the value that corresponds to the version of Red Hat Enterprise Linux (RHEL) that the host uses. If no value is specified, ccoctl.rhel8 is used by default. The following values are valid:

    • rhel8: Specify this value for hosts that use RHEL 8.

    • rhel9: Specify this value for hosts that use RHEL 9.

      Note

      The ccoctl binary is created in the directory from where you executed the command and not in /usr/bin/. You must rename the directory or move the ccoctl.<rhel_version> binary to ccoctl.

  4. Change the permissions to make ccoctl executable by running the following command:

    $ chmod 775 ccoctl

Verification

  • To verify that ccoctl is ready to use, display the help file. Use a relative file name when you run the command, for example:

    $ ./ccoctl
    Example output
    OpenShift credentials provisioning tool

Usage:
  ccoctl [command]

Available Commands:
  aws          Manage credentials objects for AWS cloud
  azure        Manage credentials objects for Azure
  gcp          Manage credentials objects for Google cloud
  help         Help about any command
  ibmcloud     Manage credentials objects for IBM Cloud
  nutanix      Manage credentials objects for Nutanix

Flags:
  -h, --help   help for ccoctl

Use "ccoctl [command] --help" for more information about a command.

Creating AWS resources with a single command

If the process the ccoctl tool uses to create AWS resources automatically meets the requirements of your organization, you can use the ccoctl aws create-all command to automate the creation of AWS resources.

Otherwise, you can create the AWS resources individually. For more information, see "Creating AWS resources individually".

Note

By default, ccoctl creates objects in the directory in which the commands are run. To create the objects in a different directory, use the --output-dir flag. This procedure uses <path_to_ccoctl_output_dir> to refer to this directory.

Prerequisites

You must have:

  • Extracted and prepared the ccoctl binary.

Procedure

  1. Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:

    $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')

  2. Extract the list of CredentialsRequest objects from the OpenShift Container Platform release image by running the following command:

    $ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \
  --to=<path_to_directory_for_credentials_requests>

    where:

    --included
    Specifies to include only the manifests that your specific cluster configuration requires.
    <path_to_directory_with_installation_configuration>
    Specifies the location of the install-config.yaml file.
    <path_to_directory_for_credentials_requests>
    Specifies the path to the directory where you want to store the CredentialsRequest objects. If the specified directory does not exist, this command creates it.

    Note

    This command might take a few moments to run.

  3. Use the ccoctl tool to process all CredentialsRequest objects by running the following command:

    $ ccoctl aws create-all \
  --name=<name> \
  --region=<aws_region> \
  --credentials-requests-dir=<path_to_credentials_requests_directory> \
  --output-dir=<path_to_ccoctl_output_dir> \
  --create-private-s3-bucket \
  --permissions-boundary-arn=<policy_arn>

    where:

    <name>
    Specifies the name used to tag any cloud resources that are created for tracking.
    <aws_region>
    Specifies the AWS region in which cloud resources will be created.
    <path_to_credentials_requests_directory>
    Specifies the directory containing the files for the component CredentialsRequest objects.
    <path_to_ccoctl_output_dir>
    Specifies the directory in which you want the ccoctl utility to create objects. By default, the utility creates objects in the directory in which the commands are run. This parameter is optional.
    --create-private-s3-bucket
    Specifies that the OpenID Connect (OIDC) configuration files should be stored in a private S3 bucket that is accessed by the IAM identity provider through a public CloudFront distribution URL. Note that by default, the ccoctl utility stores the OIDC configuration files in a public S3 bucket and uses the S3 URL as the public OIDC endpoint. This parameter is optional.
    <policy_arn>
    Specifies the Amazon Resource Name (ARN) of the AWS IAM policy to use as the permissions boundary for the IAM roles created by the ccoctl utility. This parameter is optional.

    Note

    If your cluster uses Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set, you must include the --enable-tech-preview parameter.

Verification

  • To verify that the OpenShift Container Platform secrets are created, list the files in the <path_to_ccoctl_output_dir>/manifests directory:

    $ ls <path_to_ccoctl_output_dir>/manifests
    Example output
    cluster-authentication-02-config.yaml
openshift-cloud-credential-operator-cloud-credential-operator-iam-ro-creds-credentials.yaml
openshift-cloud-network-config-controller-cloud-credentials-credentials.yaml
openshift-cluster-api-capa-manager-bootstrap-credentials-credentials.yaml
openshift-cluster-csi-drivers-ebs-cloud-credentials-credentials.yaml
openshift-image-registry-installer-cloud-credentials-credentials.yaml
openshift-ingress-operator-cloud-credentials-credentials.yaml
openshift-machine-api-aws-cloud-credentials-credentials.yaml

    You can verify that the IAM roles are created by querying AWS. For more information, refer to AWS documentation on listing IAM roles.

Creating AWS resources individually

If you need to review the JSON files that the ccoctl tool creates before modifying AWS resources, or if the process the ccoctl tool uses to create AWS resources automatically does not meet the requirements of your organization, you can create the AWS resources individually.

This option might be useful for an organization that shares the responsibility for creating these resources among different users or departments.

Otherwise, you can use the ccoctl aws create-all command to create the AWS resources automatically. For more information, see "Creating AWS resources with a single command".

Note

By default, ccoctl creates objects in the directory in which the commands are run. To create the objects in a different directory, use the --output-dir flag. This procedure uses <path_to_ccoctl_output_dir> to refer to this directory.

Some ccoctl commands make AWS API calls to create or modify AWS resources. You can use the --dry-run flag to avoid making API calls. Using this flag creates JSON files on the local file system instead. You can review and modify the JSON files and then apply them with the AWS CLI tool using the --cli-input-json parameters.

Prerequisites

  • Extract and prepare the ccoctl binary.

Procedure

  1. Generate the public and private RSA key files that are used to set up the OpenID Connect provider for the cluster by running the following command:

    $ ccoctl aws create-key-pair
    Example output
    2021/04/13 11:01:02 Generating RSA keypair
2021/04/13 11:01:03 Writing private key to /<path_to_ccoctl_output_dir>/serviceaccount-signer.private
2021/04/13 11:01:03 Writing public key to /<path_to_ccoctl_output_dir>/serviceaccount-signer.public
2021/04/13 11:01:03 Copying signing key for use by installer

    where serviceaccount-signer.private and serviceaccount-signer.public are the generated key files.

    This command also creates a private key that the cluster requires during installation in /<path_to_ccoctl_output_dir>/tls/bound-service-account-signing-key.key.

  2. Create an OpenID Connect identity provider and S3 bucket on AWS by running the following command:

    $ ccoctl aws create-identity-provider \
  --name=<name> \
  --region=<aws_region> \
  --public-key-file=<path_to_ccoctl_output_dir>/serviceaccount-signer.public

    where:

    <name>
    Specifies the name used to tag any cloud resources that are created for tracking.
    <aws_region>
    Specifies the AWS region in which cloud resources will be created.
    <path_to_ccoctl_output_dir>
    Specifies the path to the public key file that the ccoctl aws create-key-pair command generated.
    Example output
    2021/04/13 11:16:09 Bucket <name>-oidc created
2021/04/13 11:16:10 OpenID Connect discovery document in the S3 bucket <name>-oidc at .well-known/openid-configuration updated
2021/04/13 11:16:10 Reading public key
2021/04/13 11:16:10 JSON web key set (JWKS) in the S3 bucket <name>-oidc at keys.json updated
2021/04/13 11:16:18 Identity Provider created with ARN: arn:aws:iam::<aws_account_id>:oidc-provider/<name>-oidc.s3.<aws_region>.amazonaws.com

    where openid-configuration is a discovery document and keys.json is a JSON web key set file.

    This command also creates a YAML configuration file in /<path_to_ccoctl_output_dir>/manifests/cluster-authentication-02-config.yaml. This file sets the issuer URL field for the service account tokens that the cluster generates, so that the AWS IAM identity provider trusts the tokens.

  3. Create IAM roles for each component in the cluster:

    1. Set a $RELEASE_IMAGE variable with the release image from your installation file by running the following command:

      $ RELEASE_IMAGE=$(./openshift-install version | awk '/release image/ {print $3}')

    2. Extract the list of CredentialsRequest objects from the OpenShift Container Platform release image:

      $ oc adm release extract \
  --from=$RELEASE_IMAGE \
  --credentials-requests \
  --included \
  --install-config=<path_to_directory_with_installation_configuration>/install-config.yaml \
  --to=<path_to_directory_for_credentials_requests>

      where:

      --included
      Specifies the --included parameter, which includes only the manifests that your specific cluster configuration requires.
      --install-config
      Specifies the location of the install-config.yaml file.
      -to
      Specifies the path to the directory where you want to store the CredentialsRequest objects. If the specified directory does not exist, this command creates it.

    3. Use the ccoctl tool to process all CredentialsRequest objects by running the following command:

      $ ccoctl aws create-iam-roles \
  --name=<name> \
  --region=<aws_region> \
  --credentials-requests-dir=<path_to_credentials_requests_directory> \
  --identity-provider-arn=arn:aws:iam::<aws_account_id>:oidc-provider/<name>-oidc.s3.<aws_region>.amazonaws.com

      Note

      For AWS environments that use alternative IAM API endpoints, such as GovCloud, you must also specify your region with the --region parameter.

      If your cluster uses Technology Preview features that are enabled by the TechPreviewNoUpgrade feature set, you must include the --enable-tech-preview parameter.

      For each CredentialsRequest object, ccoctl creates an IAM role with a trust policy that is tied to the specified OIDC identity provider, and a permissions policy as defined in each CredentialsRequest object from the OpenShift Container Platform release image.

Verification

  • To verify that the OpenShift Container Platform secrets are created, list the files in the <path_to_ccoctl_output_dir>/manifests directory:

    $ ls <path_to_ccoctl_output_dir>/manifests
    Example output
    cluster-authentication-02-config.yaml
openshift-cloud-credential-operator-cloud-credential-operator-iam-ro-creds-credentials.yaml
openshift-cloud-network-config-controller-cloud-credentials-credentials.yaml
openshift-cluster-api-capa-manager-bootstrap-credentials-credentials.yaml
openshift-cluster-csi-drivers-ebs-cloud-credentials-credentials.yaml
openshift-image-registry-installer-cloud-credentials-credentials.yaml
openshift-ingress-operator-cloud-credentials-credentials.yaml
openshift-machine-api-aws-cloud-credentials-credentials.yaml

    You can verify that the IAM roles are created by querying AWS. For more information, refer to AWS documentation on listing IAM roles.

Incorporating the Cloud Credential Operator utility manifests

To implement short-term security credentials managed outside the cluster for individual OpenShift Container Platform components, you must move the manifest files that the Cloud Credential Operator utility (ccoctl) created to the correct directories for the installation program.

Prerequisites

  • You have configured an account with the cloud platform that hosts your cluster.
  • You have configured the Cloud Credential Operator utility (ccoctl).
  • You have created the cloud provider resources that are required for your cluster with the ccoctl utility.

Procedure

  1. If you did not set the credentialsMode parameter in the install-config.yaml configuration file to Manual, modify the value as shown:

    Sample configuration file snippet
    apiVersion: v1
baseDomain: example.com
credentialsMode: Manual
# ...

  2. If you have not previously created installation manifest files, do so by running the following command:

    $ openshift-install create manifests --dir <installation_directory>

    where <installation_directory> is the directory in which the installation program creates files.

  3. Copy the manifests that the ccoctl utility generated to the manifests directory that the installation program created by running the following command:

    $ cp /<path_to_ccoctl_output_dir>/manifests/* ./manifests/

  4. Copy the tls directory that contains the private key to the installation directory:

    $ cp -a /<path_to_ccoctl_output_dir>/tls .

Cluster Network Operator configuration

To manage cluster networking, configure the Cluster Network Operator (CNO) Network custom resource (CR) named cluster so the cluster uses the correct IP ranges and network plugin settings for reliable pod and service connectivity.

Some settings and fields are inherited at the time of install or by the default.Network.type plugin, OVN-Kubernetes.

The CNO configuration inherits the following fields during cluster installation from the Network API in the Network.config.openshift.io API group:

clusterNetwork
IP address pools from which pod IP addresses are allocated.
serviceNetwork
IP address pool for services.
defaultNetwork.type
Cluster network plugin. OVNKubernetes is the only supported plugin during installation.

You can specify the cluster network plugin configuration for your cluster by setting the fields for the defaultNetwork object in the CNO object named cluster.

Cluster Network Operator configuration object

The fields for the Cluster Network Operator (CNO) are described in the following table:

Cluster Network Operator configuration object

Field Type Description
metadata.name string The name of the CNO object. This name is always cluster.
spec.clusterNetwork array A list specifying the blocks of IP addresses from which pod IP addresses are allocated and the subnet prefix length assigned to each individual node in the cluster. If you use dual-stack networking, specify IPv4 and IPv6 address families. For example:

spec:
  clusterNetwork:
  - cidr: 10.128.0.0/19
    hostPrefix: 23
  - cidr: fd01::/48
    hostPrefix: 64


If you install a cluster on AWS with dual-stack networking, the order of addresses must match the dual-stack configuration you selected. For example, if you specified the DualStackIPv4Primary, list the IPv4 address first.
spec.serviceNetwork array A block of IP addresses for services. If you use dual-stack networking, specify IPv4 and IPv6 address families. For example:

spec:
  serviceNetwork:
  - 172.30.0.0/14
  - fd02::/112


If you install a cluster on AWS with dual-stack networking, the order of addresses must match the dual-stack configuration you selected. For example, if you specified the DualStackIPv4Primary, list the IPv4 address first.

You can customize this field only in the install-config.yaml file before you create the manifests. The value is read-only in the manifest file.
spec.defaultNetwork object Configures the network plugin for the cluster network.
spec.additionalRoutingCapabilities.providers array This setting enables a dynamic routing provider. The FRR routing capability provider is required for the route advertisement feature. The only supported value is FRR.

  • FRR: The FRR routing provider


spec:
  additionalRoutingCapabilities:
    providers:
    - FRR

Warning

For a cluster that needs to deploy objects across multiple networks, ensure that you specify the same value for the clusterNetwork.hostPrefix parameter for each network type that is defined in the install-config.yaml file. Setting a different value for each clusterNetwork.hostPrefix parameter can impact the OVN-Kubernetes network plugin, where the plugin cannot effectively route object traffic among different nodes.

defaultNetwork object configuration

The values for the defaultNetwork object are defined in the following table:

defaultNetwork object

Field Type Description
type string OVNKubernetes. The Red Hat OpenShift Networking network plugin is selected during installation. This value cannot be changed after cluster installation.

Note

OpenShift Container Platform uses the OVN-Kubernetes network plugin by default.
ovnKubernetesConfig object This object is only valid for the OVN-Kubernetes network plugin.

Configuration for the OVN-Kubernetes network plugin

The following table describes the configuration fields for the OVN-Kubernetes network plugin:

ovnKubernetesConfig object

Field Type Description
mtu integer The maximum transmission unit (MTU) for the Geneve (Generic Network Virtualization Encapsulation) overlay network. This is detected automatically based on the MTU of the primary network interface. You do not normally need to override the detected MTU.

If the auto-detected value is not what you expect it to be, confirm that the MTU on the primary network interface on your nodes is correct. You cannot use this option to change the MTU value of the primary network interface on the nodes.

If your cluster requires different MTU values for different nodes, you must set this value to 100 less than the lowest MTU value in your cluster. For example, if some nodes in your cluster have an MTU of 9001, and some have an MTU of 1500, you must set this value to 1400.
genevePort integer The port to use for all Geneve packets. The default value is 6081. This value cannot be changed after cluster installation.
ipsecConfig object Specify a configuration object for customizing the IPsec configuration.
ipv4 object Specifies a configuration object for IPv4 settings.
ipv6 object Specifies a configuration object for IPv6 settings.
policyAuditConfig object Specify a configuration object for customizing network policy audit logging. If unset, the defaults audit log settings are used.
routeAdvertisements string Specifies whether to advertise cluster network routes. The default value is Disabled.
  • Enabled: Import routes to the cluster network and advertise cluster network routes as configured in RouteAdvertisements objects.
  • Disabled: Do not import routes to the cluster network or advertise cluster network routes.
gatewayConfig object Optional: Specify a configuration object for customizing how egress traffic is sent to the node gateway. Valid values are Shared and Local. The default value is Shared. In the default setting, the Open vSwitch (OVS) outputs traffic directly to the node IP interface. If you are using hardware offloading, Red Hat recommends to use the default Shared gateway mode to bypass the host routing plane. In the Local setting, it traverses the host network; consequently, it gets applied to the routing table of the host.

Note

While migrating egress traffic, you can expect some disruption to workloads and service traffic until the Cluster Network Operator (CNO) successfully rolls out the changes.

ovnKubernetesConfig.ipv4 object

Field Type Description
internalTransitSwitchSubnet string If your existing network infrastructure overlaps with the 100.88.0.0/16 IPv4 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. The subnet for the distributed transit switch that enables east-west traffic. This subnet cannot overlap with any other subnets used by OVN-Kubernetes or on the host itself. It must be large enough to accommodate one IP address per node in your cluster.

The default value is 100.88.0.0/16.
internalJoinSubnet string If your existing network infrastructure overlaps with the 100.64.0.0/16 IPv4 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. You must ensure that the IP address range does not overlap with any other subnet used by your OpenShift Container Platform installation. The IP address range must be larger than the maximum number of nodes that can be added to the cluster. For example, if the clusterNetwork.cidr value is 10.128.0.0/14 and the clusterNetwork.hostPrefix value is /23, then the maximum number of nodes is 2^(23-14)=512.

The default value is 100.64.0.0/16.

ovnKubernetesConfig.ipv6 object

Field Type Description
internalTransitSwitchSubnet string If your existing network infrastructure overlaps with the fd97::/64 IPv6 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. The subnet for the distributed transit switch that enables east-west traffic. This subnet cannot overlap with any other subnets used by OVN-Kubernetes or on the host itself. It must be large enough to accommodate one IP address per node in your cluster.

The default value is fd97::/64.
internalJoinSubnet string If your existing network infrastructure overlaps with the fd98::/64 IPv6 subnet, you can specify a different IP address range for internal use by OVN-Kubernetes. You must ensure that the IP address range does not overlap with any other subnet used by your OpenShift Container Platform installation. The IP address range must be larger than the maximum number of nodes that can be added to the cluster.

The default value is fd98::/64.

policyAuditConfig object

Field Type Description
rateLimit integer The maximum number of messages to generate every second per node. The default value is 20 messages per second.
maxFileSize integer The maximum size for the audit log in bytes. The default value is 50000000 or 50 MB.
maxLogFiles integer The maximum number of log files that are retained.
destination string One of the following additional audit log targets:

libc
The libc syslog() function of the journald process on the host.
udp:<host>:<port>
A syslog server. Replace <host>:<port> with the host and port of the syslog server.
unix:<file>
A UNIX Domain Socket file specified by <file>.
null
Do not send the audit logs to any additional target.
syslogFacility string The syslog facility, such as kern, as defined by RFC5424. The default value is local0.

gatewayConfig object

Field Type Description
routingViaHost boolean Set this field to true to send egress traffic from pods to the host networking stack. For highly-specialized installations and applications that rely on manually configured routes in the kernel routing table, you might want to route egress traffic to the host networking stack. By default, egress traffic is processed in OVN to exit the cluster and is not affected by specialized routes in the kernel routing table. The default value is false.

This field has an interaction with the Open vSwitch hardware offloading feature. If you set this field to true, you do not receive the performance benefits of the offloading because egress traffic is processed by the host networking stack.
ipForwarding object You can control IP forwarding for all traffic on OVN-Kubernetes managed interfaces by using the ipForwarding specification in the Network resource. Specify Restricted to only allow IP forwarding for Kubernetes related traffic. Specify Global to allow forwarding of all IP traffic. For new installations, the default is Restricted. For updates to OpenShift Container Platform 4.14 or later, the default is Global.

Note

The default value of Restricted sets the IP forwarding to drop.
ipv4 object Optional: Specify an object to configure the internal OVN-Kubernetes masquerade address for host to service traffic for IPv4 addresses.
ipv6 object Optional: Specify an object to configure the internal OVN-Kubernetes masquerade address for host to service traffic for IPv6 addresses.

gatewayConfig.ipv4 object

Field Type Description
internalMasqueradeSubnet string The masquerade IPv4 addresses that are used internally to enable host to service traffic. The host is configured with these IP addresses and the shared gateway bridge interface. The default value is 169.254.169.0/29.

Important

For OpenShift Container Platform 4.17 and later versions, clusters use 169.254.0.0/17 as the default masquerade subnet. For upgraded clusters, there is no change to the default masquerade subnet.

gatewayConfig.ipv6 object

Field Type Description
internalMasqueradeSubnet string The masquerade IPv6 addresses that are used internally to enable host to service traffic. The host is configured with these IP addresses and the shared gateway bridge interface. The default value is fd69::/125.

Important

For OpenShift Container Platform 4.17 and later versions, clusters use fd69::/112 as the default masquerade subnet. For upgraded clusters, there is no change to the default masquerade subnet.

ipsecConfig object

Field Type Description
mode string Specifies the behavior of the IPsec implementation. Must be one of the following values:

  • Disabled: IPsec is not enabled on cluster nodes.
  • External: IPsec is enabled for network traffic with external hosts.
  • Full: IPsec is enabled for pod traffic and network traffic with external hosts.
Example OVN-Kubernetes configuration with IPsec enabled
defaultNetwork:
  type: OVNKubernetes
  ovnKubernetesConfig:
    mtu: 1400
    genevePort: 6081
    ipsecConfig:
      mode: Full

Specifying advanced network configuration

You can use advanced network configuration for your OpenShift Container Platform network plugin to integrate your cluster into your existing network environment.

You can specify advanced network configuration only before you install the cluster.

Warning

Customizing your network configuration by modifying the OpenShift Container Platform manifest files created by the installation program is not supported. Applying a manifest file that you create, as in the following procedure, is supported.

Prerequisites

  • You have created the install-config.yaml file and completed any modifications to it.

Procedure

  1. Change to the directory that contains the installation program and create the manifests:

    $ ./openshift-install create manifests --dir <installation_directory>

    where <installation_directory> specifies the name of the directory that contains the install-config.yaml file for your cluster.

  2. Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

    apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:

  3. Specify the advanced network configuration for your cluster in the cluster-network-03-config.yml file, such as in the following example: The following example enables IPsec for the OVN-Kubernetes network provider:

    apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    ovnKubernetesConfig:
      ipsecConfig:
        mode: Full

  4. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program consumes the manifests/ directory when you create the Ignition config files.

  5. Remove the Kubernetes manifest files that define the control plane machines and compute MachineSets:

    $ rm -f openshift/99_openshift-cluster-api_master-machines-*.yaml openshift/99_openshift-cluster-api_worker-machineset-*.yaml

    Because you create and manage these resources yourself, you do not have to initialize them.

    • You can preserve the MachineSet files to create compute machines by using the machine API, but you must update references to them to match your environment.

Additional resources

Configuring an Ingress Controller Network Load Balancer on a new AWS cluster

You can create an Ingress Controller backed by an Amazon Web Services Network Load Balancer (NLB) on a new cluster in situations where you need more transparent networking capabilities.

Prerequisites

  • Create and edit the install-config.yaml file. For instructions, see "Creating the installation configuration file" in the Additonal resources section.

Procedure

  1. Change to the directory that contains the installation program and create the manifests:

    $ ./openshift-install create manifests --dir <installation_directory>
    • For <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.

  2. Create a file that is named cluster-ingress-default-ingresscontroller.yaml in the <installation_directory>/manifests/ directory:

    $ touch <installation_directory>/manifests/cluster-ingress-default-ingresscontroller.yaml
    <installation_directory>
    Specifies the directory name that contains the manifests/ directory for your cluster.

  3. Check the several network configuration files that exist in the manifests/ directory by entering the following command:

    $ ls <installation_directory>/manifests/cluster-ingress-default-ingresscontroller.yaml
    Example output
    cluster-ingress-default-ingresscontroller.yaml

  4. Open the cluster-ingress-default-ingresscontroller.yaml file in an editor and enter a custom resource (CR) that describes the Operator configuration you want:

    apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: null
  name: default
  namespace: openshift-ingress-operator
spec:
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: NLB
    type: LoadBalancerService

  5. Save the cluster-ingress-default-ingresscontroller.yaml file and quit the text editor.

  6. Optional: Back up the manifests/cluster-ingress-default-ingresscontroller.yaml file because the installation program deletes the manifests/ directory during cluster creation.

Configure hybrid networking with OVN-Kubernetes

To configure hybrid networking with OVN-Kubernetes, you can set hybridOverlayConfig during installation or patch the Cluster Network Operator (CNO) after installation.

Note

This configuration is necessary to run both Linux and Windows nodes in the same cluster.

Prerequisites

  • You defined OVNKubernetes for the networking.networkType parameter in the install-config.yaml file. See the installation documentation for configuring OpenShift Container Platform network customizations on your chosen cloud provider for more information.

Procedure

  1. Change to the directory that contains the installation program and create the manifests:

    $ ./openshift-install create manifests --dir <installation_directory>

    For the <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.

  2. Create a stub manifest file for the advanced network configuration that is named cluster-network-03-config.yml in the <installation_directory>/manifests/ directory:

    $ cat <<EOF > <installation_directory>/manifests/cluster-network-03-config.yml
apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
EOF

    For <installation_directory>, specify the directory name that contains the manifests/ directory for your cluster.

  3. Open the cluster-network-03-config.yml file in an editor and specify a hybrid networking configuration similar to the following example:

    apiVersion: operator.openshift.io/v1
kind: Network
metadata:
  name: cluster
spec:
  defaultNetwork:
    ovnKubernetesConfig:
      hybridOverlayConfig:
        hybridClusterNetwork:
        - cidr: 10.132.0.0/14
          hostPrefix: 23
        hybridOverlayVXLANPort: 9898

    where:

    spec.defaultNetwork.ovnKubernetesConfig.hybridOverlayConfig.hybridClusterNetwork
    Specifies the CIDR configuration used for nodes on the additional overlay network. The hybridClusterNetwork CIDR must not overlap with the clusterNetwork CIDR.
    spec.defaultNetwork.ovnKubernetesConfig.hybridOverlayConfig.hybridOverlayVXLANPort
    Specifies a custom VXLAN port for the additional overlay network. This is required for running Windows nodes in a cluster installed on vSphere, and must not be configured for any other cloud provider. The custom port can be any open port excluding the default 6081 port. For more information on this requirement, see Pod-to-pod connectivity between hosts is broken in the Microsoft documentation.

    Note

    Windows Server Long-Term Servicing Channel (LTSC): Windows Server 2019 is not supported on clusters with a custom hybridOverlayVXLANPort value because this Windows server version does not support selecting a custom VXLAN port.

  4. Save the cluster-network-03-config.yml file and quit the text editor.

  5. Optional: Back up the manifests/cluster-network-03-config.yml file. The installation program deletes the manifests/ directory when creating the cluster.

Additional resources

Deploying the cluster

To deploy your OpenShift Container Platform cluster, you initialize installation by running the openshift-install create cluster command from the directory that contains the installation program. The installation program provisions the required infrastructure and completes the cluster setup.

Warning

You can run the create cluster command of the installation program only once, during initial installation.

Prerequisites

  • You have configured an account with the cloud platform that hosts your cluster.
  • You have the OpenShift Container Platform installation program and the pull secret for your cluster.
  • You have verified that the cloud provider account on your host has the correct permissions to deploy the cluster. An account with incorrect permissions causes the installation process to fail with an error message that displays the missing permissions.

Procedure

  1. In the directory that contains the installation program, initialize the cluster deployment by running the following command:
$ ./openshift-install create cluster --dir <installation_directory> \
    --log-level=info

where:

  • <installation_directory>: Specifies the location of your customized ./install-config.yaml file.
  • --log-level: Specifies the log level. To view different installation details, specify warn, debug, or error instead of info.

  1. Optional: Remove or disable the AdministratorAccess policy from the IAM account that you used to install the cluster.

    Note

    The elevated permissions provided by the AdministratorAccess policy are required only during installation.

Verification

When the cluster deployment completes successfully:

  • The terminal displays directions for accessing your cluster, including a link to the web console and credentials for the kubeadmin user.

  • Credential information also outputs to <installation_directory>/.openshift_install.log.

    Warning

    Do not delete the installation program or the files that the installation program creates. Both are required to delete the cluster.

    The following example shows the expected output:

    ...
INFO Install complete!
INFO To access the cluster as the system:admin user when using 'oc', run 'export KUBECONFIG=/home/myuser/install_dir/auth/kubeconfig'
INFO Access the OpenShift web-console here: https://console-openshift-console.apps.mycluster.example.com
INFO Login to the console with user: "kubeadmin", and password: "password"
INFO Time elapsed: 36m22s

    Warning

    • The Ignition config files that the installation program generates contain certificates that expire after 24 hours, which are then renewed at that time. If the cluster is shut down before renewing the certificates and the cluster is later restarted after the 24 hours have elapsed, the cluster automatically recovers the expired certificates. The exception is that you must manually approve the pending node-bootstrapper certificate signing requests (CSRs) to recover kubelet certificates. See the documentation for Recovering from expired control plane certificates for more information.
    • It is recommended that you use Ignition config files within 12 hours after they are generated because the 24-hour certificate rotates from 16 to 22 hours after the cluster is installed. By using the Ignition config files within 12 hours, you can avoid installation failure if the certificate update runs during installation.

Provisioning your own DNS records

Use your cluster name and base cluster domain to configure a CNAME record for the API service api.<cluster_name>.<base_domain>. with the API load balancer DNS name. Similarly, use the load balancer DNS name of the Ingress service to provision a CNAME record for the *.apps.<cluster_name>.<base_domain>. hostname by using your cluster name and base cluster domain.

Warning

User-provisioned DNS is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

Prerequisites

  • You have installed the AWS CLI.

Procedure

  1. Add the userProvisionedDNS parameter to the install-config.yaml file and enable the parameter. For more information, see "Enabling a user-managed DNS".

  2. Install your cluster.

  3. If you are installing a private cluster, set the api_lb_name variable by running the following command:

    $ api_lb_name="${INFRA_ID}-int"

  4. If you are installing a public cluster, set the api_lb_name variable by running the following command:

    $ api_lb_name="${INFRA_ID}-ext"

  5. To retrieve the DNS name of the API service, run the following command:

    $ aws --region ${REGION} elbv2 describe-load-balancers --names ${api_lb_name} --query 'LoadBalancers[*].DNSName' --output text

  6. Use the DNS name and your cluster name and base cluster domain to configure your own DNS record with the api.<cluster_name>.<base_domain>. hostname.

  7. To retrieve the DNS name of the Ingress service, run the following command:

    $ ingress_lb_name=$(aws --region ${REGION} resourcegroupstaggingapi get-resources --resource-type-filters elasticloadbalancing:loadbalancer --tag-filters Key=kubernetes.io/cluster/${INFRA_ID},Values=owned Key=kubernetes.io/service-name,Values=openshift-ingress/router-default --query 'ResourceTagMappingList[*].ResourceARN | [0]' --output text | awk -F'/' '{print $2}')

  8. Run the following command, which uses the variable ingress_lb_name generated from the previous command:

    $ aws --region ${REGION} elb describe-load-balancers --load-balancer-names ${ingress_lb_name} --query 'LoadBalancerDescriptions[].DNSName' --output text

  9. Use the DNS name and your cluster name and base cluster domain to configure your own DNS record with the *.apps.<cluster_name>.<base_domain>. hostname.

Logging in to the cluster by using the CLI

To log in to your cluster as the default system user, export the kubeconfig file. This configuration enables the CLI to authenticate and connect to the specific API server created during OpenShift Container Platform installation.

The kubeconfig file is specific to a cluster and OpenShift Container Platform generates it during installation.

Prerequisites

  • You deployed an OpenShift Container Platform cluster.
  • You installed the OpenShift CLI (oc).

Procedure

  1. Export the kubeadmin credentials by running the following command:

    $ export KUBECONFIG=<installation_directory>/auth/kubeconfig

    where:

    <installation_directory>
    Specifies the path to the directory that stores the installation files.

  2. Verify you can run oc commands successfully using the exported configuration by running the following command:

    $ oc whoami
    Example output
    system:admin

Next steps

  • "Customize your cluster"
  • "Remote health reporting"

Logging in to the cluster by using the web console

To verify that your cluster deployed successfully and access its features, log in to the OpenShift Container Platform web console as the kubeadmin user.

Prerequisites

  • You have access to the installation host.
  • You completed a cluster installation and all cluster Operators are available.

Procedure

  1. Obtain the password for the kubeadmin user from the kubeadmin-password file on the installation host:

    $ cat <installation_directory>/auth/kubeadmin-password

    Note

    Or, you can obtain the kubeadmin password from the <installation_directory>/.openshift_install.log log file on the installation host.

  2. List the OpenShift Container Platform web console route:

    $ oc get routes -n openshift-console | grep 'console-openshift'

    Note

    Or, you can obtain the OpenShift Container Platform route from the <installation_directory>/.openshift_install.log log file on the installation host.

    Example output
    console     console-openshift-console.apps.<cluster_name>.<base_domain>            console     https   reencrypt/Redirect   None

  3. Navigate to the route detailed in the output of the preceding command in a web browser and log in as the kubeadmin user.

Additional resources