Configuring ingress cluster traffic on AWS¶

OpenShift Container Platform provides methods for communicating from outside the cluster with services running in the cluster. This method uses load balancers on Amazon Web Services (AWS), specifically a Network Load Balancer (NLB) or a Classic Load Balancer (CLB). Both types of load balancers can forward the IP address of the client to the node, but a CLB requires proxy protocol support, which OpenShift Container Platform automatically enables.

There are two ways to switch an Ingress Controller from using a CLB to using an NLB. Use only one of these approaches for a given Ingress Controller; do not combine them.

Force replace the Ingress Controller that is currently using a CLB. This deletes the IngressController object and an outage occurs while the new DNS records propagate and the NLB is being provisioned.
Edit the existing IngressController to set spec.endpointPublishingStrategy.loadBalancer.providerParameters.aws.type to NLB. Starting in OpenShift Container Platform 4.22, the cloud controller does not reprovision the load balancer automatically. The IngressController displays a Progressing condition stating that you must delete the router Service in the openshift-ingress namespace so that a new load balancer can be created. That interruption can change the load balancer hostname and IP addresses. Complete the subnets update procedure to read the Progressing condition and delete the router Service.

You can configure these load balancers on a new or existing AWS cluster.

Configuring Classic Load Balancer timeouts on AWS¶

To prevent connection drops for long-running processes in OpenShift Container Platform, configure custom timeout periods for specific routes or Ingress Controllers.

Ensure these settings account for the Amazon Web Services Classic Load Balancer (CLB) default timeout of 60 seconds to maintain stable network traffic.

If the timeout period of the CLB is shorter than the route timeout or Ingress Controller timeout, the load balancer can prematurely terminate the connection. You can prevent this problem by increasing both the timeout period of the route and CLB.

Configure route timeouts¶

You can configure the default timeouts for an existing route when you have services in need of a low timeout, which is required for Service Level Availability (SLA) purposes, or a high timeout, for cases with a slow back end.

Warning

If you configured a user-managed external load balancer in front of your OpenShift Container Platform cluster, ensure that the timeout value for the user-managed external load balancer is higher than the timeout value for the route. This configuration prevents network congestion issues over the network that your cluster uses.

Prerequisites

You deployed an Ingress Controller on a running cluster.

Procedure

Using the oc annotate command, add the timeout to the route:

$ oc annotate route <route_name> \
    --overwrite haproxy.router.openshift.io/timeout=<timeout><time_unit>

<timeout>: Supported time units are microseconds (us), milliseconds (ms), seconds (s), minutes (m), hours (h), or days (d).

The following example sets a timeout of two seconds on a route named myroute:
```
$ oc annotate route myroute --overwrite haproxy.router.openshift.io/timeout=2s
```

Configure Classic Load Balancer timeouts¶

You can configure the default timeouts for a Classic Load Balancer (CLB) to extend idle connections.

Prerequisites

You must have a deployed Ingress Controller on a running cluster.

Procedure

Set an Amazon Web Services connection idle timeout of five minutes for the default ingresscontroller by running the following command:

$ oc -n openshift-ingress-operator patch ingresscontroller/default \
    --type=merge --patch='{"spec":{"endpointPublishingStrategy": \
    {"type":"LoadBalancerService", "loadBalancer": \
    {"scope":"External", "providerParameters":{"type":"AWS", "aws": \
    {"type":"Classic", "classicLoadBalancer": \
    {"connectionIdleTimeout":"5m"}}}}}}}'

Optional: Restore the default value of the timeout by running the following command:
```
$ oc -n openshift-ingress-operator patch ingresscontroller/default \
    --type=merge --patch='{"spec":{"endpointPublishingStrategy": \
    {"loadBalancer":{"providerParameters":{"aws":{"classicLoadBalancer": \
    {"connectionIdleTimeout":null}}}}}}}'
```
Note

You must specify the scope field when you change the connection timeout value unless the current scope is already set. When you set the scope field, you do not need to do so again if you restore the default timeout value.

Configuring ingress cluster traffic on AWS using a Network Load Balancer¶

To enable high-performance communication between external services and your OpenShift Container Platform cluster, configure an Amazon Web Services Network Load Balancer (NLB). You can set up an NLB on a new or existing AWS cluster to manage ingress traffic with low latency.

Dual-stack networking for the Ingress Controller load balancer on AWS¶

On Amazon Web Services, an Ingress Controller must use a publishing Service type Network Load Balancer (NLB) to enable publishing over IPv4 and IPv6 when the cluster runs AWS dual-stack networking. A Classic Load Balancer (CLB) does not support the dual-stack publishing path.

Warning

Dual-stack networking for OpenShift Container Platform on Amazon Web Services is a Technology Preview feature only. Technology Preview features are not supported with Red Hat production service level agreements (SLAs) and might not be functionally complete. Red Hat does not recommend using them in production. These features provide early access to upcoming product features, enabling customers to test functionality and provide feedback during the development process.

For more information about the support scope of Red Hat Technology Preview features, see Technology Preview Features Support Scope.

If your Ingress Controller uses an NLB and the cluster-scoped Infrastructure resource named cluster contains DualStackIPv4Primary or DualStackIPv6Primary in the status.platformStatus.aws.ipFamily field, the Ingress Operator sets the Ingress Controller load balancer Service to dual-stack IP families.

The Service lists IPv4 first for DualStackIPv4Primary and IPv6 first for DualStackIPv6Primary.

If the Ingress Controller uses a CLB and the cluster runs AWS dual-stack networking, the publishing load balancer stays IPv4-only. To expose the Ingress Controller over IPv4 and IPv6, you must configure the Ingress Controller to use an NLB.

Switching the Ingress Controller from using a Classic Load Balancer to a Network Load Balancer¶

To improve performance and reduce latency for cluster traffic in OpenShift Container Platform on Amazon Web Services, switch an Ingress Controller using a Classic Load Balancer (CLB) to one that uses a Network Load Balancer (NLB).

Switching between these load balancers does not delete the IngressController object.

Warning

This procedure might cause an outage that can last several minutes due to new DNS records propagation, new load balancers provisioning, and other factors. IP addresses and canonical names of the Ingress Controller load balancer might change after applying this procedure.

Procedure

Modify the existing Ingress Controller that you want to switch to by using an NLB. This example assumes that your default Ingress Controller has an External scope and no other customizations:
Example ingresscontroller.yaml file
```
apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: null
  name: default
  namespace: openshift-ingress-operator
spec:
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: NLB
    type: LoadBalancerService
```
Note

If you do not specify a value for the spec.endpointPublishingStrategy.loadBalancer.providerParameters.aws.type field, the Ingress Controller uses the spec.loadBalancer.platform.aws.type value from the cluster Ingress configuration that was set during installation.

Tip

If your Ingress Controller has other customizations that you want to update, such as changing the domain, consider force replacing the Ingress Controller definition file instead.
Apply the changes to the Ingress Controller YAML file by running the command:
```
$ oc apply -f ingresscontroller.yaml
```

Check that the Progressing condition of the Ingress Controller is set to True by running the following command:

$ oc get ingresscontroller default -n openshift-ingress-operator -o jsonpath='{.status.conditions[?(@.type=="Progressing")]}'

Delete the service associated with the Ingress Controller by running the following command:
```
$ oc -n openshift-ingress delete svc/router-<name>
```
- Replace <name> with the specific instance name of your Ingress Controller.
  
  Expect several minutes of outages while the Ingress Controller updates.

Verification

Confirm that the Ingress Controller updated successfully by running the following command:

$ oc get ingresscontroller -n openshift-ingress-operator default -o jsonpath="{.status.conditions}" | yq -PC

Switching the Ingress Controller from using a Network Load Balancer to a Classic Load Balancer¶

To support specific networking configurations in OpenShift Container Platform on Amazon Web Services, switch an Ingress Controller using a Network Load Balancer (NLB) to one that uses a Classic Load Balancer (CLB).

Switching between these load balancers does not delete the IngressController object.

Warning

This procedure might cause an outage that can last several minutes due to new DNS records propagation, new load balancers provisioning, and other factors. IP addresses and canonical names of the Ingress Controller load balancer might change after applying this procedure.

Procedure

Modify the existing Ingress Controller that you want to switch to using a CLB. This example assumes that your default Ingress Controller has an External scope and no other customizations:
Example ingresscontroller.yaml file
```
apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: null
  name: default
  namespace: openshift-ingress-operator
spec:
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: Classic
    type: LoadBalancerService
```
Note

If you do not specify a value for the spec.endpointPublishingStrategy.loadBalancer.providerParameters.aws.type field, the Ingress Controller uses the spec.loadBalancer.platform.aws.type value from the cluster Ingress configuration that was set during installation.

Tip

If your Ingress Controller has other customizations that you want to update, such as changing the domain, consider force replacing the Ingress Controller definition file instead.
Apply the changes to the Ingress Controller YAML file by running the command:
```
$ oc apply -f ingresscontroller.yaml
```

Check that the Progressing condition of the Ingress Controller is set to True by running the following command:

$ oc get ingresscontroller default -n openshift-ingress-operator -o jsonpath='{.status.conditions[?(@.type=="Progressing")]}'

Delete the service associated with the Ingress Controller by running the following command:
```
$ oc -n openshift-ingress delete svc/router-<name>
```
- Replace <name> with the specific instance name of your Ingress Controller.
  
  Expect several minutes of outages while the Ingress Controller updates.

Verification

Confirm that the Ingress Controller updated successfully by running the following command:

$ oc get ingresscontroller -n openshift-ingress-operator default -o jsonpath="{.status.conditions}" | yq -PC

Replacing Ingress Controller Classic Load Balancer with Network Load Balancer¶

To improve performance and reduce latency for traffic in OpenShift Container Platform on Amazon Web Services, replace an Ingress Controller using a Classic Load Balancer (CLB) with one that uses a Network Load Balancer (NLB).

Warning

This procedure might cause an outage that can last several minutes due to new DNS records propagation, new load balancers provisioning, and other factors. IP addresses and canonical names of the Ingress Controller load balancer might change after applying this procedure.

Procedure

Create a file with a new default Ingress Controller. The following example assumes that your default Ingress Controller has an External scope and no other customizations:
Example ingresscontroller.yml file
```
apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: null
  name: default
  namespace: openshift-ingress-operator
spec:
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: NLB
    type: LoadBalancerService
```
If your default Ingress Controller has other customizations, ensure that you modify the file accordingly.

Tip

If your Ingress Controller has no other customizations and you are only updating the load balancer type, consider following the procedure detailed in "Switching the Ingress Controller from using a Classic Load Balancer to a Network Load Balancer".
Force replace the Ingress Controller YAML file:
```
$ oc replace --force --wait -f ingresscontroller.yml
```
Wait until the Ingress Controller is replaced. Expect several of minutes of outages.

Configuring an Ingress Controller Network Load Balancer on an existing AWS cluster¶

To improve performance for high-traffic workloads in OpenShift Container Platform, configure an Ingress Controller backed by an Amazon Web Services Network Load Balancer (NLB) on an existing cluster.

You can create an Ingress Controller backed by an Amazon Web Services Network Load Balancer (NLB) on an existing cluster.

Prerequisites

You installed an AWS cluster.
PlatformStatus of the infrastructure resource must be AWS.
- To verify that the PlatformStatus is AWS, run the following command:
```
$ oc get infrastructure/cluster -o jsonpath='{.status.platformStatus.type}'
AWS
```

Procedure

Create the Ingress Controller manifest:

 $ cat ingresscontroller-aws-nlb.yaml

Example output

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  name: <ingress_controller_name>
  namespace: openshift-ingress-operator
spec:
  domain: <unique_ingress_domain
  endpointPublishingStrategy:
    type: LoadBalancerService
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: NLB

where:

<ingress_controller_name>: Specifies a unique name for the Ingress Controller.
<unique_ingress_domain>: Specifies a domain name that is unique among all Ingress Controllers in the cluster. This variable must be a subdomain of the DNS name <clustername>.<domain>.
scope: Specifies the type of NLB, either External to use an external NLB or Internal to use an internal NLB.

Create the resource in the cluster:
```
$ oc create -f ingresscontroller-aws-nlb.yaml
```
Warning

Before you can configure an Ingress Controller NLB on a new AWS cluster, you must complete the creating the installation configuration file procedure. For more information, see "Creating the installation configuration file".

Configuring an Ingress Controller Network Load Balancer on a new AWS cluster¶

You can create an Ingress Controller backed by an Amazon Web Services Network Load Balancer (NLB) on a new cluster in situations where you need more transparent networking capabilities.

Prerequisites

Create and edit the install-config.yaml file. For instructions, see "Creating the installation configuration file" in the Additonal resources section.

Procedure

Change to the directory that contains the installation program and create the manifests:
```
$ ./openshift-install create manifests --dir <installation_directory>
```
- For <installation_directory>, specify the name of the directory that contains the install-config.yaml file for your cluster.
Create a file that is named cluster-ingress-default-ingresscontroller.yaml in the <installation_directory>/manifests/ directory:
```
$ touch <installation_directory>/manifests/cluster-ingress-default-ingresscontroller.yaml
```
<installation_directory>

Specifies the directory name that contains the manifests/ directory for your cluster.

Check the several network configuration files that exist in the manifests/ directory by entering the following command:

$ ls <installation_directory>/manifests/cluster-ingress-default-ingresscontroller.yaml

Example output

cluster-ingress-default-ingresscontroller.yaml

Open the cluster-ingress-default-ingresscontroller.yaml file in an editor and enter a custom resource (CR) that describes the Operator configuration you want:

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  creationTimestamp: null
  name: default
  namespace: openshift-ingress-operator
spec:
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: NLB
    type: LoadBalancerService

Save the cluster-ingress-default-ingresscontroller.yaml file and quit the text editor.
Optional: Back up the manifests/cluster-ingress-default-ingresscontroller.yaml file because the installation program deletes the manifests/ directory during cluster creation.

Choosing subnets while creating a LoadBalancerService Ingress Controller¶

To manually control network placement for Ingress Controllers in an existing cluster, specify the load balancer subnets in your configuration. This method provides precise control over your infrastructure by overriding the default automatic subnet discovery method used by Amazon Web Services.

Prerequisites

You must have an installed AWS cluster.
You must know the names or IDs of the subnets to which you intend to map your IngressController.

Procedure

Create a custom resource (CR) YAML file, such as sample-ingress.yaml, and specifying the following content for the file:

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  namespace: openshift-ingress-operator
  name: <name>
spec:
  domain: <domain>
  endpointPublishingStrategy:
    type: LoadBalancerService
    loadBalancer:
      scope: External
  dnsManagementPolicy: Managed
# ...

Add subnets to the CR file:

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  name:  <name>
  namespace: openshift-ingress-operator
spec:
  domain: <domain>
  endpointPublishingStrategy:
    type: LoadBalancerService
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: Classic
          classicLoadBalancer:
            subnets:
              ids:
              - <subnet>
              - <subnet>
              - <subnet>
dnsManagementPolicy: Managed

where:

name: Specifies a name for the IngressController.
domain: Specifies the DNS name serviced by the IngressController.
classicLoadBalancer: Specifies the type of load balancer, either classicLoadBalancer if using a CLB or networkLoadBalancer field if using an NLB.
ids: Specifies a subnet by name using the names field instead of specifying the subnet by ID. This field is optional.
<subnet>: Specifies the subnet IDs (or names if you using names).

Warning

You can specify a maximum of one subnet per availability zone. Only provide public subnets for external Ingress Controllers and private subnets for internal Ingress Controllers.

Save and apply the CR file by using the OpenShift CLI (oc):
```
$  oc apply -f sample-ingress.yaml
```

Confirm the load balancer was provisioned successfully by checking the IngressController conditions.

$ oc get ingresscontroller -n openshift-ingress-operator <name> -o jsonpath="{.status.conditions}" | yq -PC

Updating the subnets on an existing Ingress Controller¶

You can update an IngressController with manually specified load balancer subnets in OpenShift Container Platform to avoid any disruptions, to maintain the stability of your services, and to ensure that your network configuration aligns with your specific requirements.

The example in the procedure shows you how to select and apply new subnets, verify the configuration changes, and confirm successful load balancer provisioning.

Warning

This procedure may cause an outage that can last several minutes due to new DNS records propagation, new load balancers provisioning, and other factors. IP addresses and canonical names of the Ingress Controller load balancer might change after applying this procedure.

Procedure

Modify the existing IngressController by specifying the new subnets:
```
apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  name:  <name>
  namespace: openshift-ingress-operator
spec:
  domain: <domain>
  endpointPublishingStrategy:
    type: LoadBalancerService
    loadBalancer:
      scope: External
      providerParameters:
        type: AWS
        aws:
          type: Classic
          classicLoadBalancer:
            subnets:
              ids:
              - <updated_subnet>
              - <updated_subnet>
              - <updated_subnet>
# ...
```
where:

<name>

Specifies a name for the IngressController.

<domain>

Specifies the DNS name serviced by the IngressController.

type

Specifies the updated subnet IDs (or names if you using names).

classicLoadBalancer

You can also use the networkLoadBalancer field if using an NLB.

ids

Specifies the subnet by name using the names field instead of specifying the subnet by ID. This parameter is optional.

<updated_subnet>

Specifies the updated subnet IDs (or names if you are using names).

Warning

You can specify a maximum of one subnet per availability zone. Only provide public subnets for external Ingress Controllers and private subnets for internal Ingress Controllers.

Examine the Progressing condition on the IngressController for instructions on how to apply the subnet updates by running the following command:

$ oc get ingresscontroller -n openshift-ingress-operator subnets -o jsonpath="{.status.conditions[?(@.type==\"Progressing\")]}" | yq -PC

Example output

lastTransitionTime: "2024-11-25T20:19:31Z"
message: 'One or more status conditions indicate progressing: LoadBalancerProgressing=True (OperandsProgressing: One or more managed resources are progressing: The IngressController subnets were changed from [...] to [...].  To effectuate this change, you must delete the service: `oc -n openshift-ingress delete svc/router-<name>`; the service load-balancer will then be deprovisioned and a new one created. This will most likely cause the new load-balancer to have a different host name and IP address and cause disruption. To return to the previous state, you can revert the change to the IngressController: [...]'
reason: IngressControllerProgressing
status: "True"
type: Progressing

To apply the update, delete the service associated with the Ingress controller by running the following command:
```
$ oc -n openshift-ingress delete svc/router-<name>
```

Verification

To confirm that the load balancer was provisioned successfully, check the IngressController conditions by running the following command:
```
$ oc get ingresscontroller -n openshift-ingress-operator <name> -o jsonpath="{.status.conditions}" | yq -PC
```

Configuring AWS Elastic IP (EIP) addresses for a Network Load Balancer (NLB)¶

You can specify static IPs, otherwise known as elastic IPs, for your network load balancer (NLB) in the Ingress Controller. This is useful in situations where you want to configure appropriate firewall rules for your cluster network.

Prerequisites

You must have an installed Amazon Web Services cluster.
You must know the names or IDs of the subnets to which you intend to map your IngressController.

Procedure

Create a YAML file that contains the following example content:

apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  namespace: openshift-ingress-operator
  name: <name>
spec:
  domain: <domain>
  endpointPublishingStrategy:
    loadBalancer:
      scope: External
      type: LoadBalancerService
      providerParameters:
        type: AWS
        aws:
          type: NLB
          networkLoadBalancer:
            subnets:
              ids:
              - <subnet_ID>
              names:
              - <subnet_A>
              - <subnet_B>
            eipAllocations:
            - <eipalloc_A>
            - <eipalloc_B>
            - <eipalloc_C>

where:

<name>: Specifies a name for the Ingress Controller.
<domain>: Specifies the DNS name serviced by the Ingress Controller.
scope: Specifies a scope for the EIPs. The scope must be set to the value External and be Internet-facing in order to allocate EIPs.
`subnets: Specifies the IDs and names for your subnets. The total number of IDs and names must be equal to your allocated EIPs.
eipAllocations: Specifies the EIP addresses.

Warning

You can specify a maximum of one subnet per availability zone. Only provide public subnets for external Ingress Controllers. You can associate one EIP address per subnet.

Save and apply the CR file by entering the following command:
```
$  oc apply -f sample-ingress.yaml
```

Verification

Confirm the load balancer was provisioned successfully by checking the IngressController conditions by running the following command:
```
$ oc get ingresscontroller -n openshift-ingress-operator <name> -o jsonpath="{.status.conditions}" | yq -PC
```

Additional resources